Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM F837M-16
Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
Přeložit název
NORMA vydána dne 1.5.2016
Informace o normě:
Označení normy: ASTM F837M-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2016
Kód zboží: NS-642294
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM F837M-16 :
Keywords:
corrosion resistance, stainless steel, socket head cap screws,, ICS Number Code 21.060.10 (Bolts, screws, studs)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in applications requiring general corrosion resistance. 1.2 Two groups of stainless steel alloys are covered, austenitic Grade A1 and martensitic Grade C1. 1.3 Four property classes are covered: austenitic A1-50 in an annealed condition at 585 MPa maximum; austenitic A1–55 in a cold worked condition at 550 MPa minimum; austenitic A1-70 in a cold worked condition at 700 MPa minimum, and martensitic C1-110 in a heat treated condition at 1100 MPa minimum. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This hazard statement pertains only to Section
13, Test Methods:
Standard Test Methods for Permeability of
Weakly Magnetic Materials Standard Practices for Detecting
Susceptibility to Intergranular Attack in Austenitic Stainless
Steels ISO 4762 Hexagon socket head cap screws Standard Practice for Fastener Sampling
for Specified Mechanical Properties and Performance Inspection Standard Specification for Stainless
Steel Metric Bolts, Screws, and Studs Standard Practice for Cleaning,
Descaling, and Passivation of Stainless Steel Parts, Equipment, and
Systems Standard Test Methods and Practices for
Chemical Analysis of Steel Products Standard Specification for Chemical
Passivation Treatments for Stainless Steel Parts Standard Practice for Commercial
Packaging Standard Test Methods for Rockwell
Hardness of Metallic Materials Standard Test Methods for Vickers
Hardness and Knoop Hardness of Metallic Materials Standard Test Method for Microindentation
Hardness of Materials Standard Test Methods for Determining the
Mechanical Properties of Externally and Internally Threaded
Fasteners, Washers, and Rivets (Metric) (Withdrawn 2015) |
Doporučujeme:
