Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM F837-13e1 1.11.2013 náhled

Doplňující informace

ASTM F837-13e1

Standard Specification for Stainless Steel Socket Head Cap Screws (Includes all amendments And changes 9/26/2018).

Automaticky přeložený název:

Standardní specifikace pro nerezové oceli s válcovou hlavou Šrouby

NORMA vydána dne 1.11.2013

Jazyk
Provedení	PDF - okamžité stažení - 1 923.90 Kč Tištěné - 1 923.90 Kč
Dostupnost	SKLADEM
Cena	1 923.90 Kč bez DPH
1 923.90 Kč

Informace o normě:

Označení normy: ASTM F837-13e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2013
Kód zboží: NS-56615
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Svorníky, šrouby, závrtné šrouby

Anotace textu normy ASTM F837-13e1 :

Keywords:

corrosion resistant, stainless steel, socket head cap screws, ICS Number Code 21.060.10 (Bolts, screws, studs)

Doplňující informace

1. Scope

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch socket head cap screw (SHCS) with nominal thread 0.060 through 1.500 in. and intended for use in applications requiring general corrosion resistance.

1.2 Three groups of stainless steel alloys are covered, austenitic Group 1 and 2 and martensitic Group 5.

1.3 Four property conditions are covered: austenitic Alloy Groups 1 and 2 in an annealed condition (AF) at 85 ksi maximum, in two cold worked conditions (CW) at 80 ksi minimum, (CW1) at 102 ksi minimum, and martensitic Alloy Group 5 in a heat treated condition (HT) at 160 ksi minimum.

1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 The following precautionary caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E92-23	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
A380-06	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A967-05	Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
D3951-18(2023)	Standard Practice for Commercial Packaging
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E384-22	Standard Test Method for Microindentation Hardness of Materials
F606-14	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F788/F788M-20e1	Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series (Includes all amendments and changes 9/12/2023).
F1470-24	Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASME B18.3	Socket Cap, Shoulder, and Set Screws--Inch Series Available from Global Engineering Documents, 15 Inverness Way, East Englewood, CO 80112-5704, http://www.global.ihs.com.
JIS G 4311	Heat Resisting Steel Bar and Wire Rods
A342/A342M-21	Standard Test Methods for Permeability of Weakly Magnetic Materials
A262-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A555/A555M-23	Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods