Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires (Includes all amendments And changes 8/16/2017).
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení Změna v Groove ( nebo Void ) Hloubka ujetou vzdálenost za osobního automobilu pneumatiky
NORMA vydána dne 10.5.2000
Označení normy: ASTM F762-94(2000)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 10.5.2000
Kód zboží: NS-56370
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
test course, tire, tire groove depth loss, tire test, trip sheet, ICS Number Code 83.160.10 (Road vehicle tyres)
Significance and Use |
The test data obtained with this test method may be used to compare the performance of various tires for the conditions under which they were tested. This test method is suitable for a variety of quality assurance, research, and development purposes, when tires are to be compared during a single series of tests. The procedure described may not be suitable for regulatory statutes or specification acceptance because the values obtained may not agree, or correlate either in rank order or absolute tread wear performance level, with values obtained on other road surfaces, or on the same surface after additional wear, under other environmental conditions, on other test vehicles, or with results obtained by other test procedures. |
1. Scope |
1.1 This test method covers a procedure to be used to obtain data for determining the changes in tire tread depth over any specified course and test period. 1.2 The tire tread depth loss data obtained according to the procedures for this test method may be used to calculate tire tread wear by way of the procedures described in Practice F1016. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Poslední aktualizace: 13.11.2024 (Počet položek: 2 210 764)
© Copyright 2024 NORMSERVIS s.r.o.