Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Measuring Particle Size of Wide-Size Range Dry Toners (Withdrawn 2003)
Automaticky přeložený název:
Standardní zkušební metoda pro měření velikosti částic Wide - rozsah velikostí Dry Tonery (Withdrawn 2003 )
NORMA vydána dne 10.5.1997
Označení normy: ASTM F751-83(1997)
Poznámka: NEPLATNÁ
Datum vydání normy: 10.5.1997
Kód zboží: NS-56345
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
Electronic sensing zone apparatus, Electrostatic copier, Flow and flow rate, Particle analysis-toners, particle size (from 1.0-80 [mu]m diameter) of dry toners, using, dual-aperture electronic sensing zone apparatus, test, ICS Number Code 19.120 (Particle size analysis. Sieving)
1. Scope |
1.1 This test method covers a dual-aperture particle size analysis using an electronic sensing zone apparatus. Dry inks, toners, etc., are covered. Particles as small as 1.0-[mu]m diameter and as large as 80-[mu]m diameter in a single powder system can be analyzed. 1.2 This test method is for particulate systems having a size range greater than 20 to 1, therefore requiring two apertures. For applications where particle size difference is between 1.4 [mu]m and 80 [mu]m and having a 20 to 1 or less size range, the simpler procedure found in Test Method F577 should be used. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 25.03.2024 (Počet položek: 2 885 931)
© Copyright 2024 NORMSERVIS s.r.o.