Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM F679-16
Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
Přeložit název
NORMA vydána dne 1.8.2016
Informace o normě:
Označení normy: ASTM F679-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2016
Kód zboží: NS-668511
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM F679-16 :
Keywords:
ICS Number Code 23.040.20 (Plastic pipes)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||
|
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, flattening resistance, impact resistance, pipe stiffness, extrusion quality, joining system, and a form of marking for large diameters, 18 to 60 in. poly(vinyl chloride) (PVC) sewer pipe and fittings with integral bell elastomeric seal joints or solvent cemented sockets. 1.2 The requirements of this specification are intended to provide pipe and fittings suitable for nonpressure drainage of sewage and surface water. Pipe and fittings produced to this specification should be installed in accordance with Practice D2321. Note 1: Industrial waste disposal lines should be installed
only with the specific approval of the governing code authority
since temperatures in excess of 140°F (60°C) and chemicals not
commonly found in drains and sewers may be encountered.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only
to the test method portion, Section 8, of this specification:
MIL-STD-129 Marking for Shipment and Storage Standard Test Method for Determination of
External Loading Characteristics of Plastic Pipe by Parallel-Plate
Loading Standard Practice for Determination of
the Impact Resistance of Thermoplastic Pipe and Fittings by Means
of a Tup (Falling Weight) Standard Practice for the Two-Step
(Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride)
(PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping
Components with Tapered Sockets Fed. Std. No. 123 Marking for Shipment (Civil Agencies)
Available from DLA Document Services, Building 4/D, 700 Robbins
Ave., Philadelphia, PA 19111-5094, http://quicksearch.dla.mil. Standard Terminology Relating to Plastic
Piping Systems Standard Test Method for Adequacy of
Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded
Fittings by Acetone Immersion Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Classification System and Basis
for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Practice for Conditioning
Plastics for Testing Standard Specification for Elastomeric
Seals (Gaskets) for Joining Plastic Pipe Standard Practice for Safe Handling of
Solvent Cements, Primers, and Cleaners Used for Joining
Thermoplastic Pipe and Fittings Standard Specification for Joints for
Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals Standard Practice for Underground
Installation of Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications Standard Specification for Solvent
Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
Doporučujeme:
