Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
Přeložit název
NORMA vydána dne 1.3.2017
Označení normy: ASTM F558-17
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2017
Kód zboží: NS-677074
Počet stran: 17
Přibližná hmotnost: 51 g (0.11 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
airflow, air performance, air power, suction, suction power, vacuum cleaner,, ICS Number Code 97.080 (Cleaning appliances)
Significance and Use | ||||||||||||||
4.1 The test results allow the comparison of the maximum potential air power available for cleaning tasks when tested under the conditions of this test method. The test results do not indicate the actual air power present during the cleaning process due to the effects of the various tools in use and surfaces being cleaned. During the nozzle on plenum chamber air performance testing, the brushroll is unloaded and this condition is not representative of the brushroll being in contact with carpet or other surfaces being cleaned. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 This test method covers procedures for determining air performance characteristics of commercial and household upright, canister, stick, hand-held, utility, and combination-type vacuum cleaners having provisions for attaching a hose and incorporating a series universal motor. This test method can be applied to the carpet cleaning mode of operation. 1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under standard operating conditions (see Note 1). The nozzle mounted on plenum testing is an ideal air performance measurement and is not intended to represent the actual air performance during carpet or floor cleaning. Note 1: For more information on air performance
characteristics, see Refs 1.3 The foot-pound-inch system of units
is used in this standard. The values in parentheses are given for
information only.
1.4 This standard may involve hazardous materials,
operations, and equipment. This standard does not purport to address all of
the safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish
appropriate safety and health practices and determine the
applicability of regulatory limitations prior to use.
Standard Specification for ASTM
Liquid-in-Glass Thermometers Standard Practice for Use of the Terms
Precision and Bias in ASTM Test Methods 210-85 Laboratory Methods of Testing Fans for
Rating IEC 60312 Ed 3.2 Vacuum Cleaners for Household
Use--Methods of Measuring the Performance Standard Specification for Air
Performance Measurement Plenum Chamber for Vacuum Cleaners Standard Specification for
Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision
Liquids Standard Practice for Conducting an
Interlaboratory Study to Determine the Precision of a Test
Method |
Poslední aktualizace: 25.04.2024 (Počet položek: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.