Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
Automaticky přeložený název:
Standardní praxe pro Koroze letadel kovů Total ponořením do údržbu Chemicals
NORMA vydána dne 1.12.2014
Označení normy: ASTM F482-09(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2014
Kód zboží: NS-55485
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aircraft metals, corrosion rates as weight loss per surface unit divided by exposure time per day, in concentrate, in use dilution, liquid corrosiveness, metal corrodibility, tank-type chemicals, temperature control, time control, total immersion corrosion, visual corrosive deterioration,, ICS Number Code 49.025.05 (Ferrous alloys in general),49.025.15 (Non-ferrous alloys in general)
Significance and Use | ||||||||
3.1 This practice not only provides information on the accumulated effects of corrosion at specific time periods under a given set of conditions, but also provides information on the initial rate of corrosion of virgin metal, the corrosion rate of metal per unit time after long exposure, and the initial corrosion rate of virgin metal after long exposure of the corroding fluid to metal. The test also provides a means of determining the direction corrosion will take with time, although causes for increase or decrease in the corrosiveness and corrodibility of media and metal (such as passive film formation or destruction, depletion of corrosive contaminate, and so forth) as a function of time are not given. |
||||||||
1. Scope | ||||||||
1.1 This practice covers the determination of the corrosiveness of tank-type aircraft maintenance chemicals on aircraft metals and the corrodibility of metals in these maintenance chemicals with time. The determination is made under conditions of total immersion by a combination of weight change measurements and visual qualitative determinations of change. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3
Standard Specification for Mineral
Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) Standard Specification for ASTM
Liquid-in-Glass Thermometers Standard Specification for Reagent
Water Standard Specification for Acetone |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.