Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM F404-14
Standard Consumer Safety Specification for High Chairs
Automaticky přeložený název:
Standardní Consumer bezpečnostní specifikace pro vysoké židle
NORMA vydána dne 1.1.2014
Informace o normě:
Označení normy: ASTM F404-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2014
Kód zboží: NS-55170
Počet stran: 14
Přibližná hmotnost: 42 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM F404-14 :
Keywords:
booster chair, feeding chair, high chair, youth chair, ICS Number Code 97.140 (Furniture)
Doplňující informace
| 1. Scope | |||||||||||||||||||
|
1.1 This consumer safety specification covers the performance requirements and methods of test to ensure the satisfactory performance of the high chair. 1.2 This consumer safety specification is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of high chairs. 1.3 For purposes of this consumer
safety specification, a high chair is a free standing chair that
elevates a child to standard dining table height. The high chair is
made for the purpose of holding a child, up to 3 years of age, who
can remain in a sitting position due to the child's own
coordination, and normally for the purposes of feeding or eating. A
high chair may be height adjustable and include a reclined position
for infants not able to remain in a sitting position due to the
child's own coordination.
1.4 No high chair produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion, Section Title |
Section |
||||||||||||||||||
|
Scope |
1 |
||||||||||||||||||
|
Referenced Documents |
2 |
||||||||||||||||||
|
Terminology |
3 |
||||||||||||||||||
|
Calibration and Standardization |
4 |
||||||||||||||||||
|
General Requirements |
5 |
||||||||||||||||||
|
Latching or Locking Mechanisms |
5.4 |
||||||||||||||||||
|
Labeling |
5.5 |
||||||||||||||||||
|
Openings |
5.6 |
||||||||||||||||||
|
Performance Requirements |
6 |
||||||||||||||||||
|
Protective Components |
6.1 |
||||||||||||||||||
|
Removable Tray or Front Torso
Support |
Tray or Front Torso Support Performance
– |
Static Load |
6.4 |
||||||||||||||||
|
Stability |
6.5 |
||||||||||||||||||
|
Exposed Coil Springs |
6.6 |
||||||||||||||||||
|
Scissoring, Shearing, and Pinching |
6.7 |
||||||||||||||||||
|
Restraint System |
6.8 |
||||||||||||||||||
|
Passive Crotch Restraint System |
6.9 |
||||||||||||||||||
|
Structural Integrity |
6.10 |
||||||||||||||||||
|
Tray Latch Release Mechanisms |
6.11 |
||||||||||||||||||
|
Side Containment |
6.12 |
||||||||||||||||||
|
Test Methods |
7 |
||||||||||||||||||
|
Locking Mechanisms |
7.1 |
||||||||||||||||||
|
Protective Components |
7.2 |
||||||||||||||||||
|
Tray or Front Torso Support – Drop Test |
7.3 |
||||||||||||||||||
|
Tray or Front Torso Support
Disengagement – |
Tray or Front Torso Support
Disengagement – |
Static Load Testing |
7.6 |
||||||||||||||||
|
Stability Testing |
7.7 |
||||||||||||||||||
|
Restraint System Retention Test |
7.8 |
||||||||||||||||||
|
Permanency of Labels and Warnings |
7.9 |
||||||||||||||||||
|
Dynamic High Chair Test |
7.10 |
||||||||||||||||||
|
Leg Openings |
7.11 |
||||||||||||||||||
|
Tray Latch Release Mechanism – Accessibility |
7.12 |
||||||||||||||||||
|
Side Containment Openings |
7.14 |
||||||||||||||||||
|
Labeling and Warnings |
8 |
||||||||||||||||||
|
Instructional Literature |
9 |
||||||||||||||||||
|
Keywords |
10 |
||||||||||||||||||
|
Rationale |
Ban of Lead-Containing Paint and Certain
Consumer Products Bearing Lead-Containing Paint Standard Consumer Safety Specification
for Toy Safety Standard Consumer Safety Performance
Specification for Carriages and Strollers Standard Consumer Safety Specification
for Non-Full-Size Baby Cribs/Play Yards 16 CFR 1500 Hazardous Substances Act Regulations
Including Sections: 16 CFR 1501 Method for Identifying Toys and Other
Articles Intended for Use by Children Under Three Years of Age
Which Present Choking, Aspiration, or Ingestion Hazards Because of
Small Parts Standard Test Methods for Rating Adhesion
by Tape Test 16 CFR 1500.48 Technical Requirements for Determining a
Sharp Point in Toys or Other Articles Intended for Use by Children
Under Eight Years of Age 16 CFR 1500.49 |
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
