Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM F366-04(2009)
Standard Specification for Fixation Pins and Wires
Automaticky přeložený název:
Standardní specifikace pro fixaci Pins a dráty
NORMA vydána dne 1.4.2009
Informace o normě:
Označení normy: ASTM F366-04(2009)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2009
Kód zboží: NS-55062
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM F366-04(2009) :
Keywords:
fixation materials, flexible surgical wire, orthopaedic medical devices, wire-surgical implants, Fixation devices/applications, Flexible surgical implant materials--specifications, Orthopaedic medical devices--specifications, Surgical implants--specifications, Surgical instruments--specifications, Wire--surgical implants, ICS Number Code 21.060.60 (Rings, bushes, sleeves, collars)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||
|
1.1 This specification covers functional dimensions for fixation pins and wires. 1.2 In recognition of many broad and varied uses of such pins and wires, many options are included. A variety, but not necessarily all, of the options are illustrated in Figs. 1-3. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 1—Pins and wires may be smooth shank or threaded. Note 2—Point angle and helix angle, where applicable, is as specified by manufacturer. Note 3—On square or triangular shanks, flats are equal and corners are on the same circumference as the pin diameter. Shank diameters on pins larger than 1/8 in. (3.2 mm) may be reduced. Note 4—Optional designs, both ends pointed or point with suture hole. FIG. 1 Fixation Pins and WiresNote 1—Shall be made of one piece of material; that is, not an assembly of two or more pieces. Note 2—Thread major diameter may be the same or larger than the shaft diameter. Note 3—Thread length shall be optional to suit intended medical application. Note 4—Optional marking in this location. FIG. 2 Fixation Pin-Knowles TypeNote 1—Thread major diameter may be the same or larger than the shaft diameter. Note 2—Thread length shall be optional to suit intended medical application. FIG. 3 Fixation Pin-Hagie Type |
||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||
|
Doporučujeme:
