Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Exoskeleton Wearing, Care, and Maintenance Instructions
Přeložit název
NORMA vydána dne 1.9.2020
Označení normy: ASTM F3392-20
Datum vydání normy: 1.9.2020
Kód zboží: NS-1005083
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
care, cleaning, decontamination, disinfection, exoskeleton, inspection, maintenance, removal from service, repair, sanitization, storage, wearing,
Significance and Use |
4.1 This practice describes the minimum information to be provided by the manufacturer to the end user related to the wearing, care, and maintenance of an exoskeleton. Adherence to this practice allows written information to be provided with the exoskeleton to purchasers. 4.2 Not every element of this practice may be applicable to all exoskeleton components or configurations. It is the manufacturer’s responsibility to determine which portions of this practice, and the corresponding requirements, are applicable to their exoskeletons. For informational requirements that are not applicable because of the nature of the product and intended use, the manufacturer shall indicate and describe those portions or requirements that are not applicable. 4.3 All information related to wearing, decontamination, care, and maintenance shall be written in a manner so that the end user can readily understand the details. To emphasize important limitations, bold lettering and explicit warning terminology (for example, signal words such as ‘danger,’ ‘warning,’ and ‘caution’ (described in ANSI Z535.4)) shall be used. Where possible, pictograms and illustrations may be used to convey specific instructions. In addition, the use of symbols, such as those provided in the care of textile products in Guide D5489, are appropriate for indicating specific care procedures used in cleaning an exoskeleton where applicable. |
1. Scope |
1.1 This practice describes the required minimum information to be conveyed by the manufacturers to buyers or end users for the wearing, care, and maintenance of exoskeletons. 1.1.1 This practice does not cover specific instructions for how to select and when to use exoskeletons or design requirements. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 13.05.2024 (Počet položek: 2 898 634)
© Copyright 2024 NORMSERVIS s.r.o.