Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements (Includes all amendments And changes 12/31/2010).
Automaticky přeložený název:
Standardní praxe pro polarizovaného světla detekci chyb v Aerospace Transparency Heating Elements
NORMA vydána dne 1.10.2003
Označení normy: ASTM F319-91a(2003)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2003
Kód zboží: NS-54972
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
coatings, conductive coatings, heating elements, polarized light, polarized light inspection, ICS Number Code 49.060 (Aerospace electric equipment and systems)
Significance and Use |
This practice is useful as a screening basis for acceptance or rejection of transparencies during manufacturing so that units with identifiable flaws will not be carried to final inspection for rejection at that time. This practice may also be employed as a go-no go technique for acceptance or rejection of the finished product. This practice is simple, inexpensive, and effective. Flaws identified by this practice, as with other optical methods, are limited to those which produce temperature gradients when electrically powered. Any other type of flaw, such as minor scratches parallel to the direction of electrical flow, are not detectable. If another method (equally suitable for flaw detection) is designated for final optical inspection of the laminated part under power, the polarized light practice will not be required for the final inspection. |
1. Scope |
1.1 This practice covers a standard procedure for detecting flaws in the conductive coating (heater element) by the observation of polarized light patterns. 1.2 This practice applies to coatings on surfaces of monolithic transparencies as well as to coatings imbedded in laminated structures. 1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Section 6. |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 30.08.2024 (Počet položek: 2 345 304)
© Copyright 2024 NORMSERVIS s.r.o.