Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM F2896-11 15.11.2011 náhled

Doplňující informace

ASTM F2896-11

Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids

Automaticky přeložený název:

Standardní specifikace pro zesíleného polyetylénu kompozitní potrubí pro přepravu ropy a plynu a nebezpečných tekutin

NORMA vydána dne 15.11.2011

Jazyk
Provedení	PDF - okamžité stažení - 1 828.00 Kč Tištěné - 1 828.00 Kč
Dostupnost	SKLADEM
Cena	1828.00 Kč bez DPH
1 828.00 Kč

Informace o normě:

Označení normy: ASTM F2896-11
Poznámka: NEPLATNÁ
Datum vydání normy: 15.11.2011
Kód zboží: NS-54686
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Trubky z plastické hmoty

Anotace textu normy ASTM F2896-11 :

Keywords:

composite, crude oil, hazardous liquids, multilayer, natural gas, pipe, polyethylene, reinforced, thermoplastic, ICS Number Code 23.040.20 (Plastic pipes)

Doplňující informace

1. Scope

1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, and markings for on-site manufactured multilayer reinforced polyethylene composite pipe. It covers nominal sizes 6 in. through 36 in. (150 mm through 915 mm). These multilayered reinforced polyethylene composite pipe products are assembled and installed in various lengths, including long continuous lengths. These products are intended for the transport of crude oil, natural gas and hazardous liquids in the rehabilitation of existing pipelines and for new pipelines.

Note 1—Hazardous liquids are those liquids defined by the U.S. Department of Transportation in 49 CFR 195.2.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D1599-18	Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D2256/D2256M-21	Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
F1249-20	Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
A312/A312M-24	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
D638-22	Standard Test Method for Tensile Properties of Plastics
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D1000-17	Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1598-23	Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1600-18	Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
D624-00(2020)	Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
A519-06	Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A333/A333M-18	Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
B 16.5	Pipe, Flanges, and Flanged Fittings
G14-04(2018)	Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
F2620-20ae2	Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings (Includes all amendments and changes 3/17/2022).
F2619/F2619M-20	Standard Specification for High-Density Polyethylene (PE) Line Pipe
F1668-16(2022)	Standard Guide for Construction Procedures for Buried Plastic Pipe
F1606-19	Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
F585-16(2021)	Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
F412-23	Standard Terminology Relating to Plastic Piping Systems
D5035-11(2019)	Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
D3850-19	Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
D2992-22	Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2837-22	Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D2774-21a	Standard Practice for Underground Installation of Thermoplastic Pressure Piping (Includes all amendments and changes 10/6/2021).
D2513-20	Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
D2122-22	Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D1693-21	Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
49 CFR 195	Code of Federal Regulations - Transportation of Hazardous Liquids by Pipeline
17 J	Unbonded Flexible Pipe - Unbonded Flexible Pipe
TR-3/2010	HDB/HDS/PDB/SDB/MRS Policies - Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), and Minimum Required Strength (MRS) Ratings for Thermoplastic Piping Materials or Pipe5

Doporučujeme:

nody.cz - Splňte si svůj sen o vlatsním e-shopu

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.