Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM F2894-21

Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven

Přeložit název

NORMA vydána dne 15.7.2021

Jazyk
Provedení	PDF - okamžité stažení - 1 477.50 Kč PDF + redline - ihned - 1 773.00 Kč Tištěné - 1 477.50 Kč Tisk + redline - 1 773.00 Kč
Dostupnost	SKLADEM
Cena	1 477.50 Kč bez DPH
1 477.50 Kč

Informace o normě:

Označení normy: ASTM F2894-21
Datum vydání normy: 15.7.2021
Kód zboží: NS-1033654
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Ochranná zařízení obecně

Anotace textu normy ASTM F2894-21 :

Keywords:
convective heat, deformation, degradation, delamination, dimensional change, dripping, flaking, growth, hole formation, hot air circulating oven, ignition, melting, protective clothing, protective equipment, separation, shrinkage, splitting,, ICS Number Code 13.340.01 (Protective equipment in general)

Doplňující informace

Significance and Use

5.1?This test method is used to evaluate the heat resistance of materials, clothing, and equipment when exposed to heat in a hot air circulating oven. The principal findings of this test method are observations of the specimen response to the heat exposure.

5.1.1?The majority of procedures specified in this test method apply to the evaluation of flat material specimens.

5.1.2?When evaluating non-flat materials, alternative procedures are required for mounting specimens and interpreting the effects of the heat exposure.

5.2?If specified, this test method is used for the measurement of material dimensional change following a convective heat exposure in a hot air circulating oven.

5.3?This test method is not intended to simulate the actual exposure of material, clothing, or equipment in high-heat conditions such as a fire environment.

1. Scope

1.1?This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing, and equipment when exposed in a hot air circulating oven.

1.2?This test method is intended to evaluate physical changes in materials, protective clothing, and equipment at a specified heat exposure.

1.2.1?The specified heat exposure in the hot air circulating oven is a combination of convective heat and radiant heat.

1.3?Materials, protective clothing, and equipment are evaluated for visible changes or subjected to a material property measurement following a specified heat exposure.

1.3.1?This test method is not to be used for the evaluation of sticking. An acceptable method for evaluating sticking of fabrics is described in NFPA 1975, Sections 7.2.1 and 8.3. The NFPA 1975 test method evaluates the thermal stability of specimens by assessing the blocking of folded specimens placed between glass plates, under a specified weight, inside an oven meeting the same characteristics of the oven used in this test method.

1.4?This test method enables the quantitative measurement of dimensional change that occurs as a result of a specified heat exposure in a hot air circulating oven.

1.5?The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are commonly used for thermal testing.

1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Note 1:?Flame-resistant and heat-resistant materials are described in a range of different standards and meet a range of different requirements. For materials tested in accordance with this test method, the applicable standard shall be used to establish preconditioning, conditioning, and testing conditions and requirements.

1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

D123-23	Standard Terminology Relating to Textiles
D7571-21	Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
E177-20	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E145-19	Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
F1494-23	Standard Terminology Relating to Protective Clothing
Test Method 135	Dimensional Changes in Automatic Home Laundering of Woven and Knit Fabrics Available from American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Research Triangle Park, NC 27709, http://www.aatcc.org.
D1776-08	Standard Practice for Conditioning and Testing Textiles
NFPA 1975	Standard on Station/Work Uniforms for Fire and Emergency Services Available from National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169-7471, http://www.nfpa.org.

Doporučujeme:

nody.cz - Splňte si svůj sen o vlatsním e-shopu

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.