Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
Automaticky přeložený název:
Standardní zkušební metoda pro vyhodnocení materiálů, ochranných oděvů a prostředků pro tepelnou odolností použití horkovzdušného oběhová Trouba
NORMA vydána dne 1.2.2014
Označení normy: ASTM F2894-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2014
Kód zboží: NS-54684
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
convective heat, deformation, degradation, delamination, dimensional change, dripping, flaking, growth, hole formation, hot air circulating oven, ignition, melting, protective clothing, protective equipment, separation, shrinkage, splitting, ICS Number Code 13.340.01 (Protective equipment in general)
Significance and Use | ||||||||||||||||||
5.1 This test method is used to evaluate the heat resistance of materials, clothing and equipment when exposed to heat in a hot air circulating oven. The principal findings of this test method are observations of the specimen response to the heat exposure. 5.1.1 The majority of procedures specified in this test method apply to the evaluation of flat material specimens. 5.1.2 When evaluating non-flat materials, alternative procedures are required for mounting specimens and interpreting the effects of the heat exposure. 5.2 If specified, this test method is used for the measurement of material dimensional change following a convective heat exposure in a hot air circulating oven. 5.3 This test method is not intended to simulate the actual exposure of material, clothing or equipment in high heat conditions such as a fire environment. |
||||||||||||||||||
1. Scope | ||||||||||||||||||
1.1 This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing and equipment when exposed in a hot air circulating oven. 1.2 This test method is intended to evaluate physical changes in materials, protective clothing and equipment at a specified heat exposure. 1.2.1 The specified heat exposure in the hot air circulating oven is a combination of convective heat and radiant heat. 1.3 Materials, protective clothing and equipment are evaluated for visible changes or subjected to a material property measurement following a specified heat exposure. 1.3.1 This test method is not to be used for the evaluation of sticking. An acceptable method for evaluating sticking of fabrics is described in NFPA 1975, Sections 7.2.1 and 8.3. The NFPA 1975 test method evaluates the thermal stability of specimens by assessing the blocking of folded specimens placed between glass plates, under a specified weight, inside an oven meeting the same characteristics of the oven used in this test method. 1.4 This test method enables the quantitative measurement of dimensional change that occurs as a result of a specified heat exposure in a hot air circulating oven. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are commonly used for thermal testing. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
|
Standard Terminology Relating to Textiles
|
|
Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
|
|
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
|
|
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
|
|
Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
|
|
Standard Terminology Relating to Protective Clothing
|
Test Method 135
|
Dimensional Changes in Automatic Home Laundering of Woven and Knit Fabrics Available from American Association of Textile Chemists and Colorists (AATCC), P.O. Box 12215, Research Triangle Park, NC 27709, http://www.aatcc.org.
|
|
Standard Practice for Conditioning and Testing Textiles
|
NFPA 1975
|
Standard on Station/Work Uniforms for Fire and Emergency Services Available from National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169-7471, http://www.nfpa.org. |
1.12.2013
1.1.2003
1.12.2006
NEPLATNÁ
1.10.2002
1.1.2009
1.2.2002
Poslední aktualizace: 05.09.2024 (Počet položek: 2 346 132)
© Copyright 2024 NORMSERVIS s.r.o.