Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating
Automaticky přeložený název:
Standardní zkušební metoda pro Nestabilní-státní Heat Transfer Vyhodnocení Flame odolných materiálů pro oděv s průtokovým ohřevem
NORMA vydána dne 1.6.2013
Označení normy: ASTM F2700-08(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2013
Kód zboží: NS-54399
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
apparel, flame resistance, heat transfer performance value,, protective clothing, thermal heat protection, ICS Number Code 13.340.10 (Protective clothing)
Significance and Use | ||||||||||||||
5.1 This test method is intended for the determination of the heat transfer performance value of a material, a combination of materials, or a comparison of different materials used in flame resistant clothing for workers exposed to combined convective and radiant thermal hazards. 5.2 This test method evaluates a material’s unsteady-state heat transfer properties when exposed to a continuous and constant heat source. Air movement at the face of the specimen and around the calorimeter can affect the measured heat transferred due to forced convective heat losses. Minimizing air movement around the specimen and test apparatus will aid in the repeatability of the results. 5.3 This test method maintains the specimen in a static, horizontal position and does not involve movement except that resulting from the exposure. 5.4 This test method specifies a standardized 84 ± 2 kW/m2 (2 ± 0.05 cal/cm2s) exposure condition. Different exposure conditions have the potential to produce different results. Use of other exposure conditions that are representative of the expected hazard are allowed but shall be reported with the results along with a determination of the exposure energy level stability. 5.5 This test method does not predict skin burn injury from the heat exposure. 1.1 This test method measures the
non-steady state heat transfer through flame resistant materials
for clothing subjected to a continuous, combined convective and
radiant heat exposure.
1.1.1 This test method is not applicable to materials that are not flame resistant. 1.1.2 This test method does not
predict a material’s skin burn injury performance from the
specified thermal energy exposure. It does not account for the
thermal energy contained in the test specimen after the exposure
has ceased.
1.2 This test method is used to
measure and describe the response of materials, products, or
assemblies to heat under controlled conditions, but does not by
itself incorporate all factors required for fire hazard or fire
risk assessment of the materials, products, or assemblies under
actual fire conditions.
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound or other units that are commonly used for thermal testing. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.