Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Assessment of Materials and Products for Declarable Substances
Automaticky přeložený název:
Standardní Příručka pro posuzování materiálů a výrobků pro uváděných látky
NORMA vydána dne 1.3.2014
Označení normy: ASTM F2577-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2014
Kód zboží: NS-54171
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
compliance, conformity assessment, declarable substances, product testing, material declaration, ICS Number Code 03.100.10 (Purchasing. Procurement. Logistics)
Significance and Use | ||||||||||
4.1 Due to requirements being placed on concentrations of substances within (or on) materials, assessing conformance of products has become a complex, time-consuming and expensive task. This guide is intended to assist the user in developing a protocol for product assessment. 4.2 A priori knowledge is based on logical deduction and scientific principles, so actual testing of a material may not be required in order to assess conformance to requirements. For example, it is possible to deduce that organic substances will not survive the temperatures required to produce wrought steel, so there is no need to test for organic substances in wrought steel nor is it possible to develop test methods and reference materials for determination of organic substances within wrought steel. 4.3 A posteriori knowledge is based on observation, experience and known facts. If 4.4 Test methods can be used as a means to verify and provide information related to substances within materials. At the same time, misinformation can be generated or inappropriate conclusions drawn when test methods are misapplied. This guide is intended to provide recommendations on the application of test methods. 4.5 Test methods may be applied by producers or by interim or end users of materials. However, it is not necessary or cost effective to test materials at each stage of production. The decision to apply test methods and the frequency of testing should be based on risk perceived by the user or can be a matter of agreement. 4.6 Assessment of plastics for presence of declarable substances is more complex than assessment of metals and alloys, since the possible ingredients are comparatively much more numerous in plastic manufacture. 4.7 This guide includes a general process and case studies in order to provide guidance and to distinguish where a priori and 1.1 This guide uses case studies to illustrate the decision process to assess materials and products for declarable substances when evaluating conformance to relevant requirements. This may be accomplished by applying existing knowledge to determine the need for further action (for example, testing). 1.2 This guide is limited to the referenced European Union directives. Other regions, countries, states or local municipalities may adopt these or similar regulations. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
15.10.2012
Historická
15.9.2012
Historická
15.7.2013
Historická
1.12.2011
Historická
1.6.2014
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 11.09.2024 (Počet položek: 2 346 290)
© Copyright 2024 NORMSERVIS s.r.o.