Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Special Requirements for Bumper Boats
Automaticky přeložený název:
Standardní praxe pro speciální požadavky na Bumper Boats
NORMA vydána dne 1.3.2011
Označení normy: ASTM F2460-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2011
Kód zboží: NS-53923
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
amusement rides and devices, operating procedures, Bumper boats, Operating procedures, Amusement rides/devices, ICS Number Code 47.080 (Small craft)
Significance and Use | ||||||||||||
The purpose of this practice is to delineate information and to establish procedures for the operation of a bumper boat amusement ride. The device is a single craft, unattached to other craft or common frame system. It is non-human powered without connection to a common energy source. It is driver controlled with respect to acceleration, speed, and steering. |
||||||||||||
1. Scope | ||||||||||||
1.1 This practice establishes criteria for the design, manufacture, and operations of bumper boats. These are boats used to bump into each other intentionally as directed by drivers as a form of entertainment. Boats are fitted with an inflatable or impact attenuating device to allow for such bumping. 1.2 This practice follows Practices F1193 and F770 as the basic level of safety for bumper boats. These practices shall be followed for all bumper boats under this practice. This practice shall include all modifications, improvements, and deviations to design, quality, manufacture, construction, ownership, operation, inspection, and maintenance of a bumper boat 1.3 This practice does not apply to personal watercraft, human powered watercraft, or watercraft used for general purposes by private owners. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.3.2014
Historická
1.3.2014
Historická
1.3.2014
Historická
1.7.2012
Historická
15.8.2006
Historická
15.4.2007
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.