Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft (Includes all amendments and changes 11/7/2018).
Přeložit název
NORMA vydána dne 1.11.2018
Označení normy: ASTM F2427-05a(2018)
Datum vydání normy: 1.11.2018
Kód zboží: NS-904539
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This specification covers the manufacture of lighter-than-air light sport aircraft. This specification covers the minimum requirements for information that shall be provided by the manufacturer or seller of new lighter-than-air aircraft as a part of the initial sale or transfer to the first end user. This information shall include, but not be limited to, the information plate attached to the aircraft, the placard notice, Aircraft Operating Instructions, the maintenance manual, and the manufacturers statement of compliance. The placard notice shall be posted in the aircraft passenger area so that it is visible to both the pilot and passenger upon entry or while seated in the aircraft. The purpose of this specification is to require provision of the minimum information necessary for the proper identification, maintenance, and operation of light sport aircraft.
Keywords:
Aircraft Operating Instructions, airplane, airship, balloon, light sport aircraft, lighter-than-air, special airworthiness certificate,, ICS Number Code 49.020 (Aircraft and space vehicles in general)
1. Scope |
1.1 This specification covers the manufacture of lighter-than-air light sport aircraft. 1.1.1 This specification covers the minimum requirements for information that shall be provided by the manufacturer or seller of new lighter-than-air aircraft as a part of the initial sale or transfer to the first end user. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.