Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Performance of Booster Heaters
Automaticky přeložený název:
Standardní zkušební metoda pro výkon Booster Ohřívače
NORMA vydána dne 1.6.2013
Označení normy: ASTM F2022-01(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2013
Kód zboží: NS-52477
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
booster, booster heater, capacity, dishwasher, dishwasher machine, efficiency, energy, performance, test method, water heater, ICS Number Code 91.140.65 (Water heating equipment)
Significance and Use | ||||||
5.1 The energy input rate test is used to confirm that the booster heater is operating properly prior to further testing. 5.2 Booster heater flow capacity is an indicator of the booster heater's ability to supply hot water for sanitation. The booster heater's flow capacity can be used by the operator to determine the appropriate size booster heater for their operation. Booster heater energy rate is an indicator of the booster heater's energy consumption during continuous water flow. The energy rate can be used by food service operators to estimate the energy consumption of the booster heater. Booster heater energy efficiency is a precise indicator of a booster heater's energy performance during the continuous flow test. This information enables the food service operator to consider energy performance when selecting a booster heater. 5.3 Booster heater flow capacity at 50 % of the maximum capacity is an indicator of the booster heater's ability to provide hot water for sanitation at this reduce flow rate condition. Booster heater energy efficiency at a flow rate of 50 % of maximum capacity is an indicator of a booster heater's energy performance at this flow rate. The booster heater outlet temperature during the capacity test at a flow rate of 50 % of maximum capacity is an indicator of the booster heater's temperature response at this reduced flow rate. 5.4 Preheat energy and time can be useful to food service operators to manage power demands and to know how quickly the booster heater can be ready for operation. 5.5 Idle energy rate and pilot energy rate can be used to estimate energy consumption during standby periods. |
||||||
1. Scope | ||||||
1.1 This test method evaluates the energy efficiency, energy consumption and water heating performance of booster heaters. The food service operator can use this evaluation to select a booster heater and understand its energy consumption. 1.2 This test method is applicable to electric, gas, and steam powered booster heaters. 1.3 The booster heater can be evaluated with respect to the following (where applicable): 1.3.1 Energy input rate (1.3.2 Pilot energy rate (1.3.3 Flow capacity rate, energy rate, and energy efficiency with 110°F (43.3°C) and 140°F (60.0°C) supply to the booster heater inlet (9.4). 1.3.4 Thermostat calibration (1.3.5 Energy rate and energy efficiency at 50% of flow capacity rate with 110°F (43.3°C) and 140°F (60.0°C) supply to the booster heater inlet (9.6). 1.3.6 Preheat energy and time (1.3.7 Idle (standby) energy rate (1.4 The values stated in inch-pound units are to be regarded as standard. The SI units in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.7.2014
Historická
1.9.2011
Historická
1.7.2012
Historická
1.11.2012
Historická
1.11.2012
Historická
1.10.2008
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.