Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení zbytkového acetaldehydu v polyethylentereftalátů lahví polymeru pomocí zařízení Automated Statická Head-Space odběru vzorků a kapilární GC s plamenoionizační detektor
NORMA vydána dne 1.10.2010
Označení normy: ASTM F2013-10
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2010
Kód zboží: NS-52447
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
AA test, acetaldehyde, carbonated soft drink, ground parison AA, PET bottles, 24 hours headspace, water, Acetaldehyde (AA), Flame ionization detectors (FID), Headspace gas chromatography, Headspace sampler, Polyethylene terephthalate bottle polymer, Polymers, ICS Number Code 55.100 (Bottles. Pots. Jars)
Significance and Use | ||||
This test method is of particular use as a quality control tool for a molding or synthesis operation. Acetaldehyde is a volatile degradation product generated during melt processing of PET. Thus, it becomes trapped in the sidewalls of a molded article and desorbs slowly into the contents packaged therein. In some foods and beverages AA can impart an off-taste that is undesirable, thus, it is important to know its concentration in PET articles that are to be used in food contact applications. The desorption conditions of 150 C for 60 min are such that no measurable AA is generated by the sample during the desorption process. |
||||
1. Scope | ||||
1.1 This test method covers a gas chromatographic procedure for the determination of the ppm residual acetaldehyde (AA) present in poly(ethylene terephthalate) (PET) homo-polymers and co-polymers which are used in the manufacture of beverage bottles. This includes sample types of both amorphous and solid-stated pellet and preform samples, as opposed to the bottle test, Test Method D4509, an acetaldehyde test requiring 24 h of desorption time at 23°C into the bottle headspace and then the concentration of the headspace quantified by a similar GC method. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.7.2010
Historická
1.10.2007
Historická
1.5.2010
Historická
1.12.2010
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 16.05.2025 (Počet položek: 2 200 115)
© Copyright 2025 NORMSERVIS s.r.o.