Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
Automaticky přeložený název:
Standardní zkušební metoda pro Dust odolnost proti erozi optických a infračervených průhledné materiály a nátěry
NORMA vydána dne 1.5.2010
Označení normy: ASTM F1864-05(2010)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2010
Kód zboží: NS-51871
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Povlaky a příslušné procesy používané v leteckém a kosmickém průmyslu
Keywords:
abrasion, dust erosion, IR window, transparent material, Dust erosion, Erosion, Infrared transparent materials, Optical materials/properties/tests--aerospace materials, Transparent materials, ICS Number Code 49.040 (Coatings and related processes used in aerospace industry)
Significance and Use | ||||||||||
All materials on exterior aircraft surfaces are subject to abrasion from airborne particles of various sizes and shapes. Transparent materials are particularly vulnerable to abrasion, since their performance is based on their ability to transmit light with a minimal amount of scatter. Scratches, pitting, and coating removal and delamination as a result of abrasion may increase scatter, reduce transmission, and degrade the performance of transparent materials. Visually transparent materials are required for pilot and air crew enclosures, such as canopies, windshields, and viewpoints. Materials transparent in the IR region (8 to 12 μm) are required for tracking, targeting, and navigational instrumentation. This test method is intended to provide a calibrated and repeatable means of determining the relative abrasion resistance of materials and coatings for optical and IR transparent materials and coatings. The test parameters for this test method can be directly related to dust cloud densities and velocities to which transparent materials are exposed in the field. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the resistance of transparent plastics and coatings used in aerospace windscreens, canopies, and viewports to surface erosion as a result of dust impingement. This test method simulates flight through a defined particle cloud environment by means of independent control of particle size, velocity, impact angle, mass loading, and test duration. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.5.2013
Historická
1.9.2011
Historická
1.12.2013
Historická
15.5.2009
Historická
1.12.2013
Historická
1.12.2013
Poslední aktualizace: 02.09.2024 (Počet položek: 2 345 509)
© Copyright 2024 NORMSERVIS s.r.o.