Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
Automaticky přeložený název:
Standardní zkušební metoda pro měření Night Vision Goggle vážený Transmisivity z průhledného částí
NORMA vydána dne 1.5.2010
Označení normy: ASTM F1863-10
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2010
Kód zboží: NS-51868
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
canopy, night vision goggles, transmissivity, transparency, windscreen, Aerospace transparent enclosures, Cleanrooms (materials/applications), Goggle-weighted transmissivity, Nighttime conditions, Transmissivity, Transparent materials, ICS Number Code 37.020 (Optical equipment)
Significance and Use | ||||||||
Significance—This test method provides a means to measure the compatibility of a given transparency through which NVGs are used at night to view outside, nighttime ambient illuminated natural scenes. Use—This test method may be used on any transparent part, including sample coupons. It is primarily intended for use on large, curved, or thick parts that may already be installed (for example, windscreens on aircraft). |
||||||||
1. Scope | ||||||||
1.1 This test method covers apparatuses and procedures that are suitable for measuring the NVG-weighted transmissivity of transparent parts including those that are large, thick, curved, or already installed. This test method is sensitive to transparencies that vary in transmissivity as a function of wavelength. 1.2 Since the transmissivity (or transmission coefficient) is a ratio of two radiance values, it has no units. The units of radiance recorded in the intermediate steps of this test method are not critical; any recognized units of radiance (for example, watts/m2-str) may be used, as long as it is consistent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.7.2010
Historická
1.5.2014
Historická
1.10.2007
Historická
1.7.2010
Historická
1.7.2010
Historická
15.9.2010
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 08.07.2025 (Počet položek: 2 207 474)
© Copyright 2025 NORMSERVIS s.r.o.