Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
Přeložit název
NORMA vydána dne 1.7.2020
Označení normy: ASTM F1858-98(2020)
Datum vydání normy: 1.7.2020
Kód zboží: NS-1000065
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
casual furniture, multipositional plastic chair, out-door furniture, patio furniture, plastic chair, reclining chair,, ICS Number Code 97.140 (Furniture)
Significance and Use | ||||||||
4.1 Tests and criteria as outlined determine the overall usability and stability of chairs in an environment simulating the conditions of use. 4.2 Tests simulate two types of surfaces: 4.2.1 Smooth surfaces, such as linoleum, wet pool decks, etc. The glass testing base (see Fig. 5) is used to simulate this surface. FIG. 5 Glass Testing Base Note 1: (A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in.
(6 ± 0.1-mm) thickness; (B) AC exterior glue fir plywood sheet,
0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness; (C)
polypropylene microfoam sheet; 0.7 ± 0.01-lb/ft3 (11 ±
0.2-kg/m3) density and 0.13 ± 0.01-in. (3 ± 0.03-mm)
thickness; and (D) glass/tempered sheet, 0.38 ± 0.04-in. (10 ±
0.1-mm) thickness.
Note 2: (A), (B), (C), and (D) shall be roughly the same
dimensions, 48 in. (1219 mm) or greater.
4.2.2 Rough surfaces, such as wooden decks, outdoor natural surfaces, etc. the plywood testing base (see Fig. 6) is used to simulate this surface. FIG. 6 Plywood Testing Base Note 1: (A) Poly(methoyl methoacrylate) sheet, 0.25 ± 0.03-in.
(6 ± 0.1-mm) thickness; and (B) AC exterior glue fir plywood sheet,
0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness.
Note 2: (A) and (B) shall be roughly the same dimensions, 48
in. (1219 mm) or greater.
|
||||||||
1. Scope | ||||||||
1.1 These performance requirements cover nationally recognized performance requirements for multipositional plastic chairs, with adjustable backs or reclining mechanisms, intended for outdoor use. 1.2 These performance requirements are not applicable to chaise lounges, upholstered chairs, or other types of furniture. 1.3 These performance requirements cover the performance of the product regarding aspects of outdoor weathering, impact, static load for seat and back, and arm testing. 1.4 Products Manufactured from Recycled Plastics—Products may be manufactured from recycled plastics as long as the performance requirements are met. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Poslední aktualizace: 14.05.2024 (Počet položek: 2 898 634)
© Copyright 2024 NORMSERVIS s.r.o.