Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Performance Requirements for Adult and Children´s Plastic Chairs for Outdoor Use
Přeložit název
NORMA vydána dne 1.8.2019
Označení normy: ASTM F1838-19
Datum vydání normy: 1.8.2019
Kód zboží: NS-969774
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
adult plastic chair, casual furniture, children´s plastic chair, outdoor furniture, patio furniture, recycled plastics, resin furniture,, ICS Number Code 97.140 (Furniture), 97.190 (Equipment for children)
Significance and Use | ||||||||
4.1 Tests and criteria as outlined determine the overall usability and stability of chairs in an environment simulating the conditions of use. 4.2 Tests simulate two types of surfaces: 4.2.1 Smooth surfaces such as linoleum, wet pool decks, etc. The glass testing base (see Fig. 2) is used to simulate this surface. FIG. 2 Glass Testing Base Note 1: (A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in.
(6 ± 0.1-mm) thickness; (B) AC exterior glue fir plywood sheet,
0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness; (C)
polypropylene microfoam sheet; 0.7 ± 0.01-lb/ft3 (11 ±
0.2-kg/m3) density and 0.13 ± 0.01-in. (3 ± 0.03-mm)
thickness; and (D) glass/tempered sheet, 0.38 ± 0.04-in. (10 ±
0.1-mm) thickness.
Note 2: (A), (B), (C), and (D) shall be roughly the same
dimensions, 48 in. (1219 mm) or greater.
4.2.2 Rough surfaces such as wooden decks, outdoor natural surfaces, etc. The plywood testing base (see Fig. 3) is used to simulate this surface. FIG. 3 Plywood Testing Base Note 1: (A) Poly(methyl methacrylate) sheet, 0.25 ± 0.03-in.
(6 ± 0.1-mm) thickness; and (B) AC exterior glue fir plywood sheet,
0.75 ± 0.08 in. (19 ± 0.2 mm) or greater in thickness.
Note 2: (A) and (B) shall be roughly the same dimensions, 48
in. (1219 mm) or greater.
|
||||||||
1. Scope | ||||||||
1.1 These standard performance requirements establish nationally recognized performance requirements for Class A (residential) and Class B (nonresidential) adult and children’s plastic chairs intended for outdoor use. 1.2 These requirements do not address conditions that affect the performance of the chair beyond the manufacturing site. 1.3 These standard performance requirements are not applicable to chaises, multi-positional chairs, upholstered chairs, or other types of furniture. 1.4 These standard performance requirements cover the performance of product regarding aspects of outdoor weathering, impact, static load, and rear leg testing. 1.5 Products Manufactured from Recycled Plastics: 1.5.1 Products may be manufactured from recycled plastics as long as the performance requirements are met. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 07.05.2024 (Počet položek: 2 897 585)
© Copyright 2024 NORMSERVIS s.r.o.