Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
Automaticky přeložený název:
Standardní zkušební metoda pro Trace kovových nečistot v elektronické platové třídy Titanium High Mass-Resolution Glow vybíjení hmotnostní spektrometr
NORMA vydána dne 15.6.2008
Označení normy: ASTM F1710-08
Poznámka: NEPLATNÁ
Datum vydání normy: 15.6.2008
Kód zboží: NS-51258
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Fyzikálně chemické analytické metody
Ostatní metody zkoušení kovů
Keywords:
lectronics, glow discharge mass spectrometer (GDMS), purity analysis, sputtering target, titanium, trace metallic impurities, Electronic materials/applications, Glow discharge mass spectrometer (GDMS), Impurities--electronic materials/applications, Purity analysis--electronic materials/applications, Sputtering process/targets, Titanium (Ti)/alloys, Trace metallic impurities, ICS Number Code 71.040.50 (Physicochemical methods of analysis), 77.040.99 (Other methods of testing metals)
Significance and Use | ||||||||||
This test method is intended for application in the semiconductor industry for evaluating the purity of materials (for example, sputtering targets, evaporation sources) used in thin film metallization processes. This test method may be useful in additional applications, not envisioned by the responsible technical committee, as agreed upon between the parties concerned. This test method is intended for use by GDMS analysts in various laboratories for unifying the protocol and parameters for determining trace impurities in pure titanium. The objective is to improve laboratory to laboratory agreement of analysis data. This test method is also directed to the users of GDMS analyses as an aid to understanding the determination method, and the significance and reliability of reported GDMS data. For most metallic species the detection limit for routine analysis is on the order of 0.01 weight ppm. With special precautions detection limits to sub-ppb levels are possible. This test method may be used as a referee method for producers and users of electronic-grade titanium materials. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the determination of concentrations of trace metallic impurities in high purity titanium. 1.2 This test method pertains to analysis by magnetic-sector glow discharge mass spectrometer (GDMS). 1.3 The titanium matrix must be 99.9 weight % (3N-grade) pure, or purer, with respect to metallic impurities. There must be no major alloy constituent, for example, aluminum or iron, greater than 1000 weight ppm in concentration. 1.4 This test method does not include all the information needed to complete GDMS analyses. Sophisticated computer-controlled laboratory equipment skillfully used by an experienced operator is required to achieve the required sensitivity. This test method does cover the particular factors (for example, specimen preparation, setting of relative sensitivity factors, determination of sensitivity limits, etc.) known by the responsible technical committee to effect the reliability of high purity titanium analyses. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.