Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
Automaticky přeložený název:
Standardní specifikace pro poly (vinyl chloridu ) ( PVC) profilového pásu pro Machine Spiral - ran Liner Pipe renovaci existujících kanalizací a Conduit
NORMA vydána dne 1.3.2015
Označení normy: ASTM F1697-09(2015)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2015
Kód zboží: NS-584159
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
expandable, gravity applications, grouted, machinemade, PVC profile strip, rehabilitation, spiral-wound liner pipe ,, ICS Number Code 23.040.20 (Plastic pipes), 83.080.20 (Thermoplastic materials)
Significance and Use | ||||||||||||||||||||||||||||||||
9.1 The requirements of this specification are intended to provide extruded PVC profile strip suitable for the field fabrication of spirally wound liner pipe for the rehabilitation of existing pipelines and conduits conveying sewage, process flow, and storm water under gravity flowconditions. Note 3: Industrial waste disposal lines should be installed
only with the specific approval of the cognizant code authority
since chemicals not commonly found in drains and sewers and
temperatures in excess of 140°F (60°C) may be
encountered.
|
||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, stiffness factor, extrusion quality, and a form of marking for extruded poly(vinyl chloride) (PVC) profile strips used for machine made field fabrication of spirally wound pipe liners in the rehabilitation of a variety of gravity applications such as sanitary sewers, storm sewers, and process piping in diameters of 6 to 180 in. and for similar sizes of non-circular pipelines such as arched or oval shapes and rectangular shapes. 1.2 Profile strip produced to this specification is for use in field fabrication of spirally wound liner pipes in nonpressure sewer and conduit rehabilitation, where the spirally wound liner pipe is expanded until it presses against the interior surface of the existing sewer or conduit, or, alternatively, where the spirally wound liner pipe is inserted as a fixed diameter into the existing sewer or conduit and the annular space between the liner pipe and the existing sewer or conduit is grouted. 1.3 This specification includes extruded profile strips made only from materials specified in 5.1. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only
to the test method portion, Section 11, of this specification:
MIL-STD-129 Marking for Shipment and Storage Standard Specification for Steel Sheet,
Zinc Coated by the Electrolytic Process for Applications Requiring
Designation of the Coating Mass on Each Surface Standard Specification for Steel Sheet,
Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed)
by the Hot-Dip Process Standard Specification for Stainless and
Heat-Resisting Chromium Steel Plate, Sheet, and Strip Standard Specification for Stainless and
Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip Standard Test Method for Adequacy of
Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded
Fittings by Acetone Immersion Standard Test Method for Determining
Dimensions of Thermoplastic Pipe and Fittings Standard Classification System and Basis
for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds
and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds Standard Terminology for Abbreviated
Terms Relating to Plastics (Withdrawn 2024) Standard Terminology Relating to
Plastics Standard Practice for Conditioning
Plastics for Testing Standard Test Methods for Flexural
Properties of Unreinforced and Reinforced Plastics and Electrical
Insulating Materials Standard Specification for General
Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip
Process (Includes all amendments and changes 11/7/2022). Standard Practice for Installation of
Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for
Rehabilitation of Existing Sewers and Conduits Standard Terminology Relating to Plastic
Piping Systems Federal Standard No. 123 Marking for Shipment (Civil Agencies)
Available from DLA Document Services, Building 4D, 700 Robbins
Ave., Philadelphia, PA 19111-5094, http://quicksearch.dla.mil. |
Historická
1.2.2010
Historická
1.11.2012
Historická
1.8.2013
Historická
1.7.2012
Historická
1.11.2013
Historická
1.8.2012
Poslední aktualizace: 02.05.2024 (Počet položek: 2 896 910)
© Copyright 2024 NORMSERVIS s.r.o.