Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM F1662-16
Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device (Withdrawn 2023)
Přeložit název
NORMA vydána dne 1.5.2016
Informace o normě:
Označení normy: ASTM F1662-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2016
Kód zboží: NS-638475
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM F1662-16 :
Keywords:
dielectric withstand voltage, dielectric breakdown voltage, membrane switch,, ICS Number Code 29.120.40 (Switches)
Doplňující informace
| Significance and Use | ||||
|
4.1 Dielectric withstand voltage testing is useful for design verification, quality control of materials, and workmanship. 4.2 This test method is used to verify that the membrane switch or printed electronic device can operate safely at its rated voltage, and withstand momentary overpotentials due to switching, surges and other similar electrical phenomena. 4.3 Specific areas of testing are, but not limited to: 4.3.1 Conductor/dielectric/conductor crossing point, 4.3.2 Close proximity of conductors, and 4.3.3 Any other conductive surface such as shielding or metal backing panel. 4.4 Dielectric withstand voltage testing may be destructive and units that have been tested should be considered unreliable for future use. 4.5 Testing using ac voltage may be useful for switches intended for control circuits powered by ac voltages. |
||||
| 1. Scope | ||||
|
1.1 This test method covers the verification of a specified dielectric withstand voltage or dielectric breakdown voltage of a membrane switch or printed electronic device. |
||||
| 2. Referenced Documents | ||||
|
Doporučujeme:
