Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills
Automaticky přeložený název:
Standardní průvodce pro použití membránové technologie v Polehčující Nebezpečné chemikálie se rozlije
NORMA vydána dne 10.4.1996
Označení normy: ASTM F1525-96(2001)
Poznámka: NEPLATNÁ
Datum vydání normy: 10.4.1996
Kód zboží: NS-50632
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
concentration, filtrate, filtration, hazardous spill mitigation, membrane, microfiltration, nanofiltration, permeate, per-vaporation, retentate, reverse osmosis, ultrafiltration, ICS Number Code 13.060.10 (Water of natural resources), 71.080.01 (Organic chemicals in general)
Significance and Use | ||
General—This guide contains information regarding the use of membrane technology to recover and concentrate hazardous materials that have entered surface and ground water as the result of a spill. Membrane technology may be applied alone or in conjunction with other treatment techniques, as follows: 4.1.1 Different types of membrane are used in series with filters to treat highly contaminated solutions reaching concentration levels of several parts per million of organic and inorganic materials. 4.1.2 Different types of membranes are applied in series to treat very dilute concentrations (parts per billion level) of organic and inorganic compounds. Each membrane type has the ability to remove specific compounds, thus producing a concentrated fraction. This fraction may require final off-site treatment but provides a significant reduction in transportation costs due to the large volume reduction achieved. 4.1.3 Membranes may be used in conjunction with destruction technologies such as advanced oxidation processes (AOPs). This method is recommended for dilute solutions. The membrane technology portion concentrates the compounds to an optimum level for AOP destruction. |
||
1. Scope | ||
1.1 This guide covers considerations for the use of membrane technology in the mitigation of dilute concentrations of spilled chemicals into ground and surface waters. 1.2 This guide addresses the application of membrane technology alone or in conjunction with other technologies. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. In addition, it is the responsibility of the user to ensure that such activity takes place under the control and direction of a qualified person with full knowledge of any potential or appropriate safety and health protocols. |
||
2. Referenced Documents | ||
|
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.