Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Selection of Booms in Accordance With Water Body Classifications
Automaticky přeložený název:
Standardní Příručka pro výběr boomu v souladu s vodním útvaru klasifikací
NORMA vydána dne 1.4.2013
Označení normy: ASTM F1523-94(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2013
Kód zboží: NS-50626
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
boom, oil spill, oil spill control equipment, ICS Number Code 47.020.40 (Lifting and cargo handling systems)
Significance and Use | ||||||||
4.1 This guide is to be used to assist in the selection of containment boom in accordance with water body classifications. 4.2 A small number of key parameters that generally affect boom performance have been used in 4.3 Many factors, other than those listed in 4.4 The values given in Table 1 are the recommended minimums for general purpose booms. As identified in 2.3, operational considerations may require trade-offs in boom properties. Special purpose booms, and general purpose booms used in special circumstances, may perform effectively with boom property values above or below those recommended in Table 1. 4.5 Effective operation of oil spill control equipment depends on many factors, of which the prevailing environmental conditions are just a few. Factors such as, but not limited to, deployment techniques, level of training, personnel performance, and mechanical reliability can also affect equipment performance. |
||||||||
1. Scope | ||||||||
1.1 This guide covers the selection of containment boom that may be used to control spills of oil and other substances that float on a body of water. 1.2 This guide does not address the compatibility of spill control equipment with spill products. It is the user's responsibility to ensure than any equipment selected is compatible with anticipated products. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||
2. Referenced Documents | ||||||||
|
1.7.1982
1.1.1983
1.1.1991
NEPLATNÁ
1.1.1983
1.1.1974
NEPLATNÁ
1.5.2013
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 17.05.2024 (Počet položek: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.