STN 210001
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM F1503-02(2012)
Standard Practice for Machine/Process Capability Study Procedure (Withdrawn 2018)
Automaticky přeložený název:
Standardní praktiky pro Machine / Process Capability studijní řád
NORMA vydána dne 1.10.2012
Informace o normě:
Označení normy: ASTM F1503-02(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2012
Kód zboží: NS-50538
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM F1503-02(2012) :
Keywords:
bilateral specification, capability, Cp, Cpk, fasterners, gage capability, inspection plan, machine capability, machine capability study, process capability, process capability study, process parameters, sampling, SPC, statistical process control, unilateral specification, ICS Number Code 25.020 (Manufacturing forming processes)
Doplňující informace
| Significance and Use |
|
5.1 This practice is designed to evaluate a machine or process isolated from its normal operating environment. In its normal operating environment, there would be many sources of variation that may not exist at a machine/process builder's facility; or put another way, this study is usually conducted under ideal conditions. Therefore, it should be recognized that the results of this practice are usually a “best case” analysis, and allowances need to be made for sources of variations that may exist at the purchaser's facility. |
| 1. Scope |
|
1.1 This practice covers provision of a proper method for determining process capability for new or existing machine processes. It is recommended that available statistical software be used for the calculation of the descriptive statistics required for decision making when using this practice. Where software is not available, Section 8 and Tables 1 and 2 are provided for manual calculations. Calculate the average Range (R) and the Process Average X For the study period, calculate: |
|
|
|
|
|
where: |
||
|
k |
= |
the number of subgroups, |
|
R1 |
= |
the range and average of the first subgroup, |
|
X1 |
= |
the range and average of the first subgroup, |
|
R2 |
= |
from the second subgroup, and |
|
X2 |
= |
from the second subgroup, etc. |
Estimate the process standard deviation (the estimate is shown as σ^ “sigma hat”).
Using the existing sample size calculate:
σ^ =
Where R is the average of the subgroup ranges (for periods with the ranges in control) and
n
2
3
4
5
6
7
8
9
10
d2
1.13
1.69
2.06
2.33
2.53
2.70
2.85
2.97
3.08
|
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing (Withdrawn 2018) |
