Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
Přeložit název
NORMA vydána dne 1.1.2020
Označení normy: ASTM F1426-20
Datum vydání normy: 1.1.2020
Kód zboží: NS-982906
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
irregular wear, tire, tread pattern, tread surface, treadwear, wear pattern,, ICS Number Code 83.160.10 (Road vehicle tyres)
Significance and Use |
3.1 This practice fulfills the need for a standardized system for identifying and describing the tread pattern features of tires that are characteristic of intermediate states of treadwear short of total wear out. This descriptive capability is especially important in testing programs devoted to the development of improved performance tires. It is also important in assessing and evaluating tires after periods of typical tire usage. |
1. Scope |
1.1 This practice provides the instructions and nomenclature to evaluate the wear features of the tread pattern on a tire for some intermediate state prior to wear out. 1.2 A tire may be characterized by certain worn tread pattern conditions that are collectively referred to as “irregular wear” features. Definitions for these features are given in a special logical and conceptual sequence. First, basic tread pattern definitions are given. Then, additional tread pattern definitions directly related to the basic tread pattern definitions are given. Understanding these secondary definitions requires the knowledge of the basic definitions. 1.3 Based on the terms of this developed system of tread pattern definitions or descriptions, a set of treadwear descriptions is presented that encompasses both regular wear and irregular wear features. 1.4 This hierarchical arrangement produces the accurate and concise definitions needed to evaluate the complex irregular wear conditions of tires. 1.5 See Fig. 1 for tread pattern features or characteristics. See Fig. 2 and Fig. 3 for typical illustrations of regular or uniform and irregular treadwear features. FIG. 1 Tread Pattern Characteristics FIG. 2 Uniform or Regular Wear FIG. 3 Types of Irregular Wear FIG. 3 Types of Irregular Wear (continued) FIG. 3 Types of Irregular Wear (continued) FIG. 3 Types of Irregular Wear (continued) FIG. 3 Types of Irregular Wear (continued) Note 1: Images courtesy of The Technology & Maintenance
Council of the American Trucking Associations, reference Radial
Tire Conditions Analysis Guide, Item # T0121. For more information,
contact TMC: (703) 838-1763; tmc@trucking.org;
http://tmc.trucking.org.
Note 2: Images courtesy of the Tire Industry Association,
reference Passenger and Light Truck Tire Conditions Manual,
www.tireindustry.org.
Note 3: In illustrations (h), (l), and (m), the ‘light’ or
‘featureless’ areas indicate high wear rate zones.
Note 4: Images courtesy of the U.S. Tire Manufacturers
Association, reference Care and Service of Passenger and Light
Truck Tires Manual, www.ustires.org.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 29.11.2024 (Počet položek: 2 209 895)
© Copyright 2024 NORMSERVIS s.r.o.