Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení akustického výkonu Hladina vysavačů
NORMA vydána dne 1.8.2014
Označení normy: ASTM F1334-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2014
Kód zboží: NS-49929
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
A-weighted, central vacuum cleaner, motorized nozzle, reference sound source (RSS), sound power level, vacuum cleaners, ICS Number Code 17.140.20 (Noise emitted by machines and equipment), 97.080 (Cleaning appliances)
Significance and Use | ||||||||||||||||||||||||
4.1 The test results enable the comparison of A-weighted sound emission from vacuum cleaners or hard-floor machines when tested under the condition of this test method. |
||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||
1.1 This test method calculates the overall A-weighted sound power level emitted by small portable upright, canister, combination vacuum cleaners, backpack vacuum cleaners, hard-floor machines, and central vacuum cleaner motorized nozzles intended for operation in domestic and commercial applications. 1.1.1 To determine the Sound Power Level of a central vacuum at the power unit location refer to Test Method F2544. 1.2 A-weighted sound pressure measurements are performed on a stationary vacuum cleaner in a semi-reverberant room. This test method determines sound power by a comparison method for small noise sources, that is, comparison to a broadband reference sound source. 1.3 This test method describes a procedure for determining the approximate A-weighted sound power level of small noise sources. This test method uses a non-special semi-reverberant room. 1.4 Results are expressed as A-weighted sound power level in decibels (referenced to one picowatt). 1.5 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||
|
Historická
1.4.2011
Historická
1.1.2013
Historická
15.6.2012
Historická
1.6.2013
Historická
1.4.2009
Historická
15.6.2012
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.