Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Sliding Watertight Door Control Systems
Přeložit název
NORMA vydána dne 1.3.2019
Označení normy: ASTM F1197-19
Datum vydání normy: 1.3.2019
Kód zboží: NS-945484
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This specification covers the design, manufacture, and testing of controls and operating mechanisms for use with sliding watertight doors. Sliding watertight door control systems shall be classified as manual and power. Manual door control system requires the operator to apply a continuous cyclic force to the door controller to cause the operating mechanism to function. This type of control system has two kinds: mechanical system and hydraulic system. The power door control system requires only that the operator exert a minimal physical force to cause the operating mechanism to function. This type of control system has three kinds: electric system, hydraulic system, and electrohydraulic system. All sliding watertight doors shall be provided with a means of local and remote manual operation. Door control systems, both manual and power, shall be designed to open and close doors against a 15° list. In addition, the operating mechanisms shall be designed to close the door against a static head equivalent to a certain water height at least above the sill on the centerline of the door.
Keywords:
door, door control, electric door control, electrohydraulic door control, manual door control, hydraulic door control, marine, marine door, mechanical door control, power door control, ship, ship door, sliding door, watertight door, watertight sliding door,, ICS Number Code 47.020.10 (Hulls and their structure elements)
1. Scope | ||||||||||||||
1.1 This specification covers the design, manufacture, and testing of controls and operating mechanisms for use with sliding watertight doors meeting the requirements of Specification F1196. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Poslední aktualizace: 28.04.2024 (Počet položek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.