Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Classification for Determination of Impact Insulation Class (IIC)
Automaticky přeložený název:
Standardní klasifikace pro stanovení Impact Insulation Class ( IIC )
NORMA vydána dne 1.1.2006
Označení normy: ASTM E989-06
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2006
Kód zboží: NS-48710
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
floors, IIC, impact noise, impact rating, tapping machine, ICS Number Code 91.120.20 (Acoustics in buildings. Sound insulation)
Significance and Use | ||||||
The rating increases as the impact sound attenuation of the floor ceiling structure increases. The rating can be used by architects, builders, and specification and code authorities for acoustical design purposes in building constructions. 4.2 The rating strictly only applies to excitation by the standard tapping machine defined in Test Methods E 492 and E 1007. It does not deal with low frequency sounds below 100 Hz that are typically generated below lightweight joist floors when they are walked on. Nor does it deal with the squeaking, crunching or rattling sounds that can occur in joist construction when elements in the construction are loose and occupants walk on the floor. 4.3 This classification shall only be used with one-third octave band data. |
||||||
1. Scope | ||||||
1.1 This classification provides a method for determining a rating that can be used to compare the levels of impact noise generated by a standard tapping machine and transmitted through different floor-ceiling assemblies. 1.2 The name given to the rating is assigned by the test method that invokes this classification. 1.3 This classification is applicable only to one third octave band impact noise data obtained using the standard tapping machine described in Test Methods E 492 and E 1007. 1.4 Test methods that invoke this classification include: 1.4.1 Test Method E 492 - the single-number rating is called impact insulation class (IIC). 1.4.2 Test Method E 1007 - the single-number rating is called field impact insulation class (FIIC). This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||
2. Referenced Documents | ||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 16.05.2024 (Počet položek: 2 902 054)
© Copyright 2024 NORMSERVIS s.r.o.