Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
Automaticky přeložený název:
Standardní zkušební metoda pro Anchorage stálých kovovým zábradlím systémů a Kolejnice pro budovy
NORMA vydána dne 1.10.2010
Označení normy: ASTM E894-88(2010)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2010
Kód zboží: NS-48389
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
anchorage systems, anchorage testing, metal railing systems, railing anchorage, Anchors/anchorage systems, Failure end point--building constructions/materials, Glass, Loading tests--building constructions/materials, Performance--building materials/applications, Railing systems (metal), Tensile properties/testing--building materials/applications, Wall rails, Wood products, ICS Number Code 91.060.30 (Ceilings. Floors. Stairs)
Significance and Use | ||||||||||
This test method is intended to provide data from which applicable design data can be derived for a given anchorage. |
||||||||||
1. Scope | ||||||||||
1.1 This test method describes procedures to be followed in testing the performance of the anchorage of all types of new and existing permanent metal railing systems (guard, stair, and ramp-rail systems), and rails (hand, grab, and transfer rails) installed in and for agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings. 1.2 This test method is applicable to railing systems and rails having major structural components made of metal and secondary components made of metal or other materials such as wood, plastics, and glass. 1.3 The test method described can be used to determine whether the anchorage of permanent metal railing systems and rails complies with anticipated performance requirements. 1.4 Specifically, this test method covers procedures for determining the static tension, shear, and moment resistance of anchorages for permanent metal railing systems, and rails in structural elements made of concrete, masonry, wood, and metal as well as related products. 1.5 No consideration is given in this test method to any possible deterioration of anchorage systems, resulting from adverse environmental conditions. The performance of special tests covering this aspect may be desirable. 1.6 Should computations make it possible to provide the needed information, testing may be employed for purposes of verification. 1.7 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.7.2014
Historická
1.6.2013
Historická
1.7.2011
Historická
1.11.2013
Historická
15.5.2012
Historická
1.11.2013
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 03.09.2024 (Počet položek: 2 346 077)
© Copyright 2024 NORMSERVIS s.r.o.