Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
Automaticky přeložený název:
Standardní praxe pro lepení obkladů z hliníku na Nekovové voština úkryt panely
NORMA vydána dne 1.9.2011
Označení normy: ASTM E874-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2011
Kód zboží: NS-48333
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
adhesive bonding, aluminum facing, honeycomb, panel, relocatable shelter, sandwich panel, shelter , Adhesion--honeycomb core sandwich panels, Adhesive bonds, Adhesives (honeycomb core sandwich panels), Aluminum alloys (honeycomb shelter panels), Aluminum facings, Bonding--honeycomb core sandwich panels, Honeycomb shelter panels, Relocatable shelters--specifications, Structural sandwich constructions, Tactical shelters, ICS Number Code 83.180 (Adhesives)
Significance and Use | ||||||||||||||||||||||||
The formation of reproducible, durable-adhesive bonds in structural units requires great care in the selection of materials, the preparation of the surfaces of the parts to be bonded, and the performance of the steps in the bonding process. Experience has shown that adhesive bonding carried out in accordance with this practice produces relatively reproducible bonds. |
||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||
1.1 This practice describes the materials, processes, and quality controls to be used in the manufacture of adhesive-bonded, aluminum-faced, nonmetallic-honeycomb-core sandwich panels for tactical shelters. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||
|
Historická
1.4.2012
Historická
1.12.2011
Historická
1.5.2013
Historická
1.4.2011
Historická
15.7.2007
Historická
15.10.2008
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.