Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
Automaticky přeložený název:
Standardní zkušební metoda pro lineární tepelné roztažnosti pevných látek termomechanickým analýzy
NORMA vydána dne 15.3.2006
Označení normy: ASTM E831-06
Poznámka: NEPLATNÁ
Datum vydání normy: 15.3.2006
Kód zboží: NS-48161
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
linear expansion, solid materials, thermal expansion coefficient, thermomechanical analysis, ICS Number Code 19.060 (Mechanical testing)
Significance and Use | ||||||||||||||||
Coefficients of linear thermal expansion are used, for example, for design purposes and to determine if failure by thermal stress may occur when a solid body composed of two different materials is subjected to temperature variations. This test method is comparable to Test Method D 3386 for testing electrical insulation materials, but it covers a more general group of solid materials and it defines test conditions more specifically. This test method uses a smaller specimen and substantially different apparatus than Test Methods E 228 and D 696. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test method determines the apparent coefficient of linear thermal expansion of solid materials using thermomechanical analysis techniques. Related information can be found in Refs. (, ). 1.2 This test method is applicable to solid materials that exhibit sufficient rigidity over the test temperature range such that the sensing probe does not produce indentation of the specimen. 1.3 The recommended lower limit of coefficient of linear thermal expansion measured with this test method is 5 m/(mC). The test method may be used at lower (or negative) expansion levels with decreased accuracy and precision (see Section ). 1.4 This test method is applicable to the temperature range from 120 to 900 C. The temperature range may be extended depending upon the instrumentation and calibration materials used. 1.5 Computer or electronic based instruments, techniques, or data treatment equivalent to this test method may also be used. Note 1Users of this test method are expressly advised that all such instruments or techniques may not be equivalent. It is the responsibility of the user to determine the necessary equivalency prior to use. 1.6 SI values are the standard. 1.7 This test method is related to ISO 11359-2 but is significantly different in technical detail. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 19.05.2024 (Počet položek: 2 902 277)
© Copyright 2024 NORMSERVIS s.r.o.