Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
Přeložit název
NORMA vydána dne 1.4.2018
Označení normy: ASTM E794-06(2018)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2018
Kód zboží: NS-847275
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
crystallization, differential scanning calorimeter, differential thermal analyzer, DSC, DTA, fusion, melting, temperature,, ICS Number Code 17.200.10 (Heat. Calorimetry)
Significance and Use | ||||||||
5.1 Differential scanning calorimetry and differential thermal analysis provide a rapid method for determining the fusion and crystallization temperatures of crystalline materials. 5.2 This test is useful for quality control, specification acceptance, and research. |
||||||||
1. Scope | ||||||||
1.1 This test method describes the determination of melting (and crystallization) temperatures of pure materials by differential scanning calorimetry (DSC) and differential thermal analysis (DTA). 1.2 This test method is generally applicable to thermally stable materials with well-defined melting temperatures. 1.3 The normal operating range is from −120 to 600°C for DSC and 25 to 1500°C for DTA. The temperature range can be extended depending upon the instrumentation used. 1.4 Computer or electronic based instruments, techniques, or data treatment equivalent to those in this test method may be used. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.