Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel (Includes all amendments And changes 6/25/2018).
Přeložit název
NORMA vydána dne 1.11.2010
Označení normy: ASTM E768-99(2010)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2010
Kód zboží: NS-638263
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
automatic image analysis, differential interference contrast, inclusions, specimen preparation, steel,, ICS Number Code 77.040.01 (Testing of metals in general)
Significance and Use | ||||||||||||||
Inclusion ratings done either manually using Test Methods E45 or automatically using Practice E1122 or E1245 are influenced by the quality of specimen preparation. This guide provides examples of proven specimen preparation methods that retain inclusions in polished steel specimens. This guide provides a procedure to determine if the prepared specimens are of suitable quality for subsequent rating of inclusions. None of these methods should be construed as defining or establishing specific procedures or limits of acceptability for any steel grade. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 This guide covers two preparation methods for steel metallographic specimens that will be analyzed for nonmetallic inclusions with automatic image analysis (AIA) equipment. The two methods of preparation are offered as accepted methods used to retain nonmetallic inclusions in steel. This guide does not limit the user to these methods. 1.2 A procedure to test the suitability of the prepared specimen for AIA inclusion work, using differential interference contrast (DIC), is presented. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.