Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM E671-98(2004)
Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
Automaticky přeložený název:
Standardní specifikace pro maximální přípustnou Thermal pnutí v žíhané skleněné laboratorní přístroje
NORMA vydána dne 1.5.2004
Informace o normě:
Označení normy: ASTM E671-98(2004)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2004
Kód zboží: NS-47599
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM E671-98(2004) :
Keywords:
Annealed glass laboratory apparatus, Cracking-stress-cracking, Friedel (Senarmont) polarimeter, Laboratory apparatus, Photoelastic measurement, Polarimeter method, Residual stress, Senarmont polarimeter, Stress, Thermal analysis (TA), Thermal residual stress, maximum permissible thermal residual stress-annealed glass laboratory, apparatus, spec, ICS Number Code 71.040.20 (Laboratory ware and related apparatus)
Doplňující informace
| 1. Scope | ||||||
|
1.1 This specification establishes a limit for thermal residual stress in reusable annealed glass laboratory apparatus as determined by prescribed photoelastic measurement procedures. 1.2 In broad classification, the laboratory glassware items covered by this specification, but not limited to, are: beakers Imhoff cones bottles, aspirator impingers bottles, dropping jars, battery bottles, gas washing jars, bell bottles, infusion jars, chromatography bottles, milk test jars, cylindrical bottles, reagent joints, ball and socket or standard taper bottles, weighing manometers bulbs, absorption percolators bulbs, leveling pycnometers bulbs, sampling stopcocks burets tubes, centrifuge condensers tubes, chromatography crystallizing dishes tubes, color comparison (turbidity) culture dishes tubes, combustion (ignition) custom apparatus tubes, connecting and adapter cylinders, graduated and plain tubes, digestion desiccators tubes, drying extraction tubes tubes, fermentation flasks tubes, thistle (spray traps) fritted ware vapor traps funnels viscometers generators, Kipp watch glasses grinder, tissue1.3 This specification recognizes that photoelastic measurements are proportional to the difference of the principal stresses. The limit imposed represents a safety factor to cover a situation in which one of the principal stresses may be larger than the apparent stress. 1.4 This specification applies only to annealed glassware that is intended for sale as such. It excludes glassware that has been thermally tempered, ion-exchanged, or laminated with glass layers of differing expansion. The intent of this specification is to limit the residual stresses for safe consumer use in annealed glass, as it leaves the manufacturer. 1.5 Stresses introduced by thermal expansion differences within the glassware are covered by this specification. Graded and glass-to-metal seals are excluded. |
||||||
| 2. Referenced Documents | ||||||
|
Doporučujeme:
