Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E354-14

Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

Automaticky přeložený název:

Standardní zkušební metody pro Chemický rozbor při vysoké teplotě, elektrické, magnetické, a dalších podobných železa, niklu a kobaltu

NORMA vydána dne 15.9.2014

Jazyk
Provedení	PDF - okamžité stažení - 2 535.90 Kč Tištěné - 2 535.90 Kč
Dostupnost	SKLADEM
Cena	2 535.90 Kč bez DPH
2 535.90 Kč

Informace o normě:

Označení normy: ASTM E354-14
Poznámka: NEPLATNÁ
Datum vydání normy: 15.9.2014
Kód zboží: NS-46531
Počet stran: 35
Přibližná hmotnost: 105 g (0.23 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Oceli se zvláštními magnetickými vlastnostmi

Anotace textu normy ASTM E354-14 :

Keywords:
aluminum, atomic absorption, chromium, cobalt, cobalt alloys, copper, high temperature alloys, ion exchange, iron, magnetic alloys, manganese, molybdenum, nickel, nickel alloys, phosphorus, silicon, spectrophotometric, tin, titrimetric, ICS Number Code 77.140.40 (Steels with special magnetic properties)

Doplňující informace

Significance and Use

4.1 These test methods for the chemical analysis of metals and alloys are primarily intended as referee methods to test such materials for compliance with compositional specifications, particularly those under the jurisdiction of the ASTM Committee on Steel, Stainless Steel and Related Alloys. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory under appropriate quality control practices such as those described in Guide E882.

1. Scope

1.1 These test methods cover the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys having chemical compositions within the following limits:

Element

Composition Range, %

Aluminum

0.005

18.00

Beryllium

0.001

0.05

Boron

0.001

1.00

Calcium

0.002

0.05

Carbon

0.001

1.10

Chromium

0.10

33.00

Cobalt

0.10

75.00

Columbium (Niobium)

0.01

6.0

Copper

0.01

10.00

Iron

0.01

85.00

Magnesium

0.001

0.05

Manganese

0.01

3.0

Molybdenum

0.01

30.0

Nickel

0.10

84.0

Nitrogen

0.001

0.20

Phosphorus

0.002

0.08

Silicon

0.01

5.00

Sulfur

0.002

0.10

Tantalum

0.005

10.0

Titanium

0.01

5.00

Tungsten

0.01

18.00

Vanadium

0.01

3.25

Zirconium

0.01

2.50

1.2 The test methods in this standard are contained in the sections indicated below:

Sections

Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % to
7.00 %)

100

Carbon, Total, by the Combustion-Thermal Conductivity Method

Discontinued

Carbon, Total, by the Combustion Gravimetric Method (0.05 % to
1.10 %)

Discontinued

Chromium by the Atomic Absorption Method (0.006 % to 1.00 %)

165

Chromium by the Peroxydisulfate Oxidation—Titration Method
(0.10 % to 33.00 %)

175

Chromium by the Peroxydisulfate-Oxidation Titrimetric Method

Discontinued

Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 % to
75 %)

Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.10 % to 5.0 %)

Copper by Neocuproine Spectrophotometric Method (0.01 % to 10.00 %)

Copper by the Sulfide Precipitation-Electrodeposition Gravimetric
Method (0.01 % to 10.00 %)

Iron by the Silver ReductionTitrimetric Method (1.0 % to 50.0 %)

192

Manganese by the Periodate Spectrophotometric Method (0.05 % to 2.00 %)

Molybdenum by the Ion Exchange—8-Hydroxyquinoline Gravi-
metric Method (1.5 % to 30 %)

184

Molybdenum by the Spectrophotometric Method (0.01 % to 1.50 %)

153

Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to
84.0 %)

135

Phosphorus by the Molybdenum Blue Spectrophotometric Method
(0.002 % to 0.08 %)

Silicon by the Gravimetric Method (0.05 % to 5.00 %)

Sulfur by the Gravimetric Method

Discontinued

Sulfur by the Combustion-Iodate Titration Method (0.005 % to
0.1 %)

Discontinued

Sulfur by the Chromatographic Gravimetric Method

Tin by the Solvent Extraction–Atomic Absorption Method (0.002 %
to 0.10 %)

143

1.3 Methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4 Some of the composition ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5 The values stated in SI units are to be regarded as standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

2. Referenced Documents

E350-23	Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
D1193-06(2018)	Standard Specification for Reagent Water
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E60-11(2022)e1	Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry (Includes all amendments and changes 6/29/2022).
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
E173-93	Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997)
E351-18	Standard Test Methods for Chemical Analysis of Cast Iron´All Types
E353-19e1	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys (Includes all amendments and changes 2/23/2022).
E882-10(2016)e1	Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory (Includes all amendments and changes 10/27/2017).
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1601-19	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
E1806-23	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ISO?5725	Precision of Test Methods--Determination of Repeatability and Reproducibility for Inter-Laboratory Tests Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
E352-23	Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

Doporučujeme:

nody.cz - Splňte si svůj sen o vlatsním e-shopu