Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení oxidu chromového v Chrome rud manganistan titrací
NORMA vydána dne 1.12.2011
Označení normy: ASTM E342-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2011
Kód zboží: NS-46489
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
chromium ores, chromium oxide content, permanganate titrimetry, titrimetry, Chrome ores, Chromium oxide content, Permanganate process, ICS Number Code 73.060.30 (Chromium ores)
Significance and Use | ||||||||||
This test method is intended to be used for compliance with compositional specifications for chromium oxide content in chromium-bearing ores. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed such as those described in Guide E882. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the determination of chromium oxide (Cr2O3) in chrome ores in the compositional range from 25 % to 60 %. Note 1—As used in this test method, “%” refers to a mass fraction (wt/wt %) (g/100g). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
1.1.1971
1.7.1983
1.11.1984
1.3.1981
1.5.1981
7.11.1985
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 17.05.2024 (Počet položek: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.