ASTM E3302-21

4.1?This guide provides an overview of analytical methods, techniques, and procedures that may be used in determination of PFAS in environmental media.

4.2?This guide provides considerations relevant to the selection and application of PFAS analytical methods, techniques, and procedures, including the limitations of published analytical methods and the potential benefits and challenges of non-standard analytical approaches.

4.3?This guide presents comparisons of published analytical methods and approaches, including tabular comparison of target analyte lists and method features, to aid users in the selection and application of analytical methods and techniques for project-specific applications.

4.4?This guide describes qualitative techniques available to determine total PFAS, including explanation of terms, discussion of techniques, conceptual overview schematic, and summary comparison table.

4.5?This guide provides current information on research trends in PFAS determination techniques applied to environmental media.

4.6?This guide provides an integrated framework that results in efficient, cost-effective decision-making for timely, appropriate response actions for PFAS-impacted environmental media.

4.7?This guide is not intended to replace or supersede federal, state, local, or international regulatory requirements. Instead, this guide may be used to complement and support such requirements.

4.8?This guide may be used by various parties involved in response actions for PFAS-impacted environmental media, including regulatory agencies, project sponsors, environmental consultants and contractors, site remediation professionals, analytical testing laboratories, data reviewers, data users, academic institutions, research institutes, and other stakeholders.

4.9?The users of this guide should consider assembling a team of experienced professionals with appropriate expertise to scope, plan, and execute PFAS environmental data acquisition activities.

4.10?The users of this guide should review the overall structure and components of this guide before proceeding with use, including the following sections:

1.1?This guide discusses the selection and application of analytical methods and techniques used to identify and determine per- and polyfluoroalkyl substances (PFAS) in environmental media. This guide provides a flexible, defensible framework applicable to a wide range of environment programs. It is structured to support a tiered approach with analytical methods, procedures, and techniques of increasing complexity as the user proceeds through the evaluation process. This guide addresses key decision criteria and best practices to aid users in achieving project objectives. There are numerous technical decisions that must be made in the selection and application of analytical methods and techniques used during environmental data acquisition programs. It is not the intent of this guide to define appropriate technical decisions, but rather to provide technical support within existing decision frameworks.

1.2?This guide informs practitioners on the considerations relevant to the selection and application of analytical methods and techniques for the quantitative and qualitative determination of per- and polyfluoroalkyl substances (PFAS) in a variety of environmental sample media. This guide encourages user-led collaboration with stakeholders, including analytical laboratories, data evaluation practitioners, and regulators, in the selection and application of analytical methods and techniques used to support project-specific decision criteria and objectives as applied within a particular environmental regulatory program. This guide recognizes the complexity and diversity of environmental programs and project objectives and provides technical support for a range of project applications.

1.3?This guide is intended to complement, not replace, existing regulatory requirements or guidance. ASTM International (ASTM) guides are not regulations; they are consensus-based standards that may be followed as needed.

1.4?This guide recognizes that PFAS can be categorized as polymeric or nonpolymeric, collectively amounting to more than 4 700 Chemical Abstracts Service (CAS)-registered substances. Environmental concerns pertaining to PFAS are centered primarily on the perfluoroalkyl acids (PFAA), a subclass of PFAS, which display extreme persistence and chain-length-dependent bioaccumulation and adverse effects in biota.

1.5?This guide recognizes that published analytical methods performed by commercial laboratories are limited to determination of a small subset of the more than 4 700 CAS-registered PFAS.

1.6?The goal of this guide is to provide a technical framework for informed selection and application of analytical methods and techniques for the quantitative and qualitative determination of target and non-target PFAS in environmental sample media.

1.7?This guide aids users in selecting PFAS analytical methods for various environmental applications.

1.8?This guide discusses existing published analytical methods for quantitative determination of method-specific lists of target analytes, as well as non-standard analytical approaches developed to qualitatively determine a broader range of PFAS, for a variety of environmental applications. This guide also provides an overview of research trends in this rapidly developing field.

1.9?This guide discusses the challenges and limitations of analytical methods and techniques in the detection and quantitation of the large, complex set of PFAS.

1.10?This guide describes widely accepted considerations and best practices used in the selection and application of analytical procedures used during PFAS environmental programs. This guide complements but does not replace existing technical guidance and regulatory requirements.

1.11?UnitsThe values stated in SI units are to be regarded as the standard.

1.12?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.13?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.