Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Industrial Woven Wire Filter Cloth
Automaticky přeložený název:
Standardní příručka pro průmyslové drátěné filtrační tkaninu
NORMA vydána dne 1.4.2011
Označení normy: ASTM E2814-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2011
Kód zboží: NS-46079
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
Dutch weave, filter cloth, micron retention, wire cloth, ICS Number Code 19.120 (Particle size analysis. Sieving)
Significance and Use | ||||||||||
Industrial filter cloth is a specialized product that can be manufactured in many specifications. The purpose of this guide is to (1) introduce standard terms and definitions associated with wire filter cloth, (2) observe common technical considerations that a user should be aware of, and (3) present a mathematical model that can be used to predict the micron retention of a filter cloth specification. As often numerous specifications may be developed to result in a common micron retention by varying the weave type, mesh count, and wire diameters, it is recommended that the user consult with their filter cloth supplier regarding specific filter cloth specifications of interest and include in their discussions durability, pressure drop, and cleaning capability requirements. The purpose of this guide is not to suggest a limited selection of specifications. The micron retention of a filter cloth specification can be mathematically modeled as well as determined by the use of a glass bead test or the bubble-point test method or both depending on the degree of fineness. Typical standard bubble-point test methods (porometry) include Test Methods F316 and SAE ARP901. |
||||||||||
1. Scope | ||||||||||
1.1 This guide covers the special grade of industrial woven wire cloth, referred to as filter cloth, for general filtration including the separation of solids from fluids (liquids or gases), based on a desired particle size retention. Filter cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.12.2013
Historická
15.10.2010
Historická
1.8.2011
Historická
1.9.2012
Historická
1.10.2009
Historická
1.11.2013
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 26.11.2024 (Počet položek: 2 206 223)
© Copyright 2024 NORMSERVIS s.r.o.