ASTM E2537-16

4.1 Application of the approach described within this standard guide applies science-based concepts and principles introduced in the FDA’s initiative on pharmaceutical CGMPs for the 21st century.4

4.2 This guide supports, and is consistent with, elements from ICH Q8 – Q11 and guidelines from USFDA, European Commission, Pharmaceutical Inspection Co-operation Scheme, and the China Food and Drug Administration.8

4.3 According to FDA Guidance for Industry, PAT, “With real time quality assurance, the desired quality attributes are ensured through continuous assessment during manufacture. Data from production batches can serve to validate the process and reflect the total system design concept, essentially supporting validation with each manufacturing batch.” In other words, the accumulated product and process understanding used to identify the Critical Quality Attributes (CQAs), together with the control strategy, will enable control of the CQAs, providing the confidence needed to show validation with each batch. This is as opposed to a traditional discrete process validation approach.

1.1 This guide describes Continuous Process Verification as an alternate approach to process validation where manufacturing process (or supporting utility system) performance is continuously monitored, evaluated, and adjusted (as necessary). It is a science-based approach to verify that a process is capable and will consistently produce product meeting its predetermined critical quality attributes. Continuous Process Verification (ICH Q8) is similarly described as Continuous Quality Verification.

1.2 Pharmaceutical and biopharmaceutical product manufacturing companies are required to provide assurance that the processes used to manufacture regulated products result in products with the specified critical quality attributes of strength identity and purity associated with the product safety and efficacy. Process validation is a way in which companies provide that assurance.

1.3 With the knowledge obtained during the product lifecycle, a framework for continuous quality improvements will be established where the following may be possible: 1.4 The principles in this guide may be applied to drug product or active pharmaceutical ingredient/drug substance pharmaceutical and biopharmaceutical batch or continuous manufacturing processes or supporting utility systems (for example, TOC for purified water and water for injection systems, and so forth).

1.5 The principles in this guide may be applied during the development and manufacturing of a new process or product or for the improvement or redesign, or both, of an existing process.

1.6 Continuous process verification may be applied to manufacturing processes that use monitoring systems that provide frequent and objective measurement of process data in real time. These processes may or may not employ in-, on-, or at-line analyzers/controllers that monitor, measure, analyze, and control the process performance. The associated processes may or may not have a design space.

1.7 This guide may be used independently or in conjunction with other proposed E55 standards to be published by ASTM International.