Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Norma ASTM E2513-07(2019)e1 1.8.2019 náhled

Doplňující informace

ASTM E2513-07(2019)e1

Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems (Includes all amendments and changes 9/5/2019).

Přeložit název

NORMA vydána dne 1.8.2019

Jazyk
Provedení	PDF - okamžité stažení - 2 113.30 Kč Tištěné - 2 113.30 Kč
Dostupnost	SKLADEM
Cena	2 113.30 Kč bez DPH
2 113.30 Kč

Informace o normě:

Označení normy: ASTM E2513-07(2019)e1
Datum vydání normy: 1.8.2019
Kód zboží: NS-969772
Počet stran: 33
Přibližná hmotnost: 99 g (0.22 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Boj proti požáru
Ostatní zdvihací zařízení

Anotace textu normy ASTM E2513-07(2019)e1 :

This specification covers the specifications, safety requirements, performance, design, practices, marking instructions and test methods for multi-story building external evacuation platform rescue systems (PRS) for emergency escape of persons who cannot use the normal means of egress to a safe area and for vertical transport of emergency responders. This specification is applicable only to PRSs that are permanently installed, designed for multi-cycle and repetitive use, and where descent is controlled to limit speed before arrival at a floor or landing zone. Conversely, this specification does not cover platform devices that are used primarily for purposes other than emergency evacuation and/or access, helicopters or other flying platforms, a PRS utilizing platforms that can be transported to or between buildings during operations, and a PRS using driving methods other than positive drive as drum and ropes.

Keywords:
evacuation, external evacuation, high-rise building, multi-platform, multi-story building, platform, platform rescue system,, ICS Number Code 13.220.10 (Fire-fighting), 53.020.99 (Other lifting equipment)

Doplňující informace

1. Scope

1.1 This specification covers the specifications, safety requirements, performance, design, practices, marking instructions and test methods for Multi-Story Building External Evacuation Platform Rescue Systems (PRS) for emergency escape of persons who cannot use the normal means of egress to a safe area and for transport of emergency responders vertically.

1.2 This specification is applicable only to PRSs:

1.2.1 Permanently installed;

1.2.2 Designed for multi-cycle and repetitive use; and

1.2.3 Where descent is controlled to limit speed before arrival at a floor or landing zone.

1.3 This specification does not cover:

1.3.1 Platform devices that are used primarily for purposes other than emergency evacuation or access, or both;

1.3.2 Helicopters or other flying platforms;

1.3.3 Any other devices covered under/within ASME A17.1;

1.3.4 A PRS utilizing platform(s) that can be transported to or between buildings during operations; and

1.3.5 A PRS using driving methods other than positive drive as drum and ropes.

1.4 Operation of a PRS is limited to trained and authorized operators.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5.1 Exception—In 5.2.1 and 5.2.2, inch-pound units are provided in parentheses after the SI units for information only.

1.6 Table of Contents:

Section

Scope

Referenced Documents

Terminology

Building Interface Requirements and Installation

Environmental Conditions

Fire and Smoke Protection

Material Requirements

Structural, Mechanical and Stability Calculations

Mechanical and Physical Properties

Buffers and Guides

Suspension Wire Rope and Wire Rope Connections

Hoisting Machines and Pulleys

Means to Prevent Falling of the Platform(s)

Electrical Power Requirements

Operation, Control and Communication

Accompanying Documents

Markings, Warnings and Operating Instructions

Verification of Safety Requirements

Quality Assurance

Maintenance

Keywords

Type Tests

Annex A1

Tests and Verifications Before First Use

Annex A2

Periodic Verifications

Annex A3

PRS Utilization Procedures

Annex A4

Rationale Statement

Appendix X1

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

A36/A36M-19	Standard Specification for Carbon Structural Steel
E84-23d	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 1/29/2024).
E136-24	Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 ?C
E631-15	Standard Terminology of Building Constructions
G153-13(2021)	Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASCE7–05	Minimum Design Loads for Building and Other Structures
A17.1	Safety Code for Elevators and Escalators

UL 1523	Controlled Descent Devices for Marine Use
NFPA 1976	Standard on Protective Clothing for Proximity Fire Fighting
ANSI Z535.4	Product Safety Signs and Labels

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.