Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets (Includes all amendments And changes 8/14/2018).
Automaticky přeložený název:
Standardní Průvodce pro ověření počítačem generované Výsledky testů přes použití standardních datových sad
NORMA vydána dne 1.11.2010
Označení normy: ASTM E2443-05(2010)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2010
Kód zboží: NS-45307
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
algorithm, calculation, data acquisition, mechanical properties, software, standard data sets, validation, verification, Algorithms, Data acquisition systems/applications, Data analysis--computerized, Mechanical properties, Software, ICS Number Code 35.080 (Software)
1. Scope | ||||||
1.1 This guide establishes a process for the verification of application software used to calculate the mechanical properties of materials. 1.2 This guide has two purposes: (1) it provides guidelines for creating standard data sets for verifying computer-generated test results, and (2) it describes how users can verify whether the calculations in their application software produce accurate, acceptable results. This does not ensure that the software will produce correct results in all cases. The verification is only for those conditions covered by the standard data sets. This guide uses the concept of standard “data sets,” which are made available by the ASTM groups responsible for each of the individual standards. 1.3 This guide defines the terminology, the format, and the process for the use of these data sets and how the data sets are to be used for verification. It does not define the specific data sets required to verify each of the application standards. Rather, such data sets would become a necessary part of the standard and would be classified as an adjunct in accord with the definition in section B29 of the “Form and Style for ASTM Standards.” This classifies an adjunct as any material that is required for use of the standard but is not practicable to publish as an integral part of the standard. 1.4 In Annex A1 there is an example of how such data sets would be made available for one example standard. 1.5 Because the verification data sets are contained in files supplied to the application software in the computer, this procedure only provides verification of post-test calculations performed by the computer system. It does not evaluate the data acquisition system, real-time calculations, or any other part of the software beyond the post-test calculations. |
||||||
2. Referenced Documents | ||||||
|
Historická
1.7.2010
Historická
1.3.2010
Historická
15.8.2010
Historická
1.5.2008
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 02.05.2024 (Počet položek: 2 896 910)
© Copyright 2024 NORMSERVIS s.r.o.