Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Digital Reference Images for Inspection of Aluminum Castings
Přeložit název
NORMA vydána dne 1.12.2022
Označení normy: ASTM E2422-22
Datum vydání normy: 1.12.2022
Kód zboží: NS-1098663
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aluminum, castings, digital reference image, discontinuities, X-ray,, ICS Number Code 77.150.10 (Aluminium products)
Reference Radiograph E2422 Standard Digital Reference Images for Inspection of Aluminum Castings + Active Standard
Vybrané provedení:Significance and Use | ||||||||||||||||
4.1?Personnel utilizing reference radiographs to this standard shall be qualified to perform radiographic interpretation in accordance with a nationally or internationally recognized NDT personnel qualification practice or standard and certified by the employer or certifying agency, as applicable. The practice or standard used and its applicable revision shall be identified in the contractual agreement between the using parties. If assistance is needed with interpreting specifications and product requirements as applied to the reference radiographs, a certified Level III shall be consulted before accept/reject decisions are made (if the Level III is the radiographic interpreter, this may be the same person). 4.2?These digital reference images are intended for reference only, but are so designed that acceptance standards, which may be developed for particular requirements, can be specified in terms of these digital reference images. The illustrations are digital images of castings that were produced under conditions designed to develop the discontinuities. The images of the 1/4-in. (6.35-mm) castings are intended to be used in the thickness range up to and including 1/2-in. (12.7 mm). The images of the 3/4-in. (19.1-mm) castings are intended to be used in the thickness range of over 1/2?in., up to and including 2 in. (51 mm). 4.3?Image DeteriorationMany conditions can affect the appearance and functionality of digital reference images. For example, electrical interference, hardware incompatibilities, and corrupted files or drivers may affect their appearance. The ASTM E2002 line pair gauges located in the lower right hand corner of each digital reference can be used as an aid to detect image deterioration by comparing the measured resolution using the gauges to the resolution stated on the digital reference image. Do not use the digital reference images if their appearance has been adversely affected such that the interpretation and use of the images could be influenced. 4.4?Agreement should be reached between cognizant engineering organization and the supplier that the system used by the supplier is capable of detecting and classifying the required discontinuities. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1?These digital reference images illustrate the types and degrees of discontinuities that may be found in aluminum-alloy castings. The castings illustrated are in thicknesses of 1/4?in. (6.35 mm) and 3/4?in. (19.1 mm). 1.2?All areas of this standard may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. These items should be addressed in the purchase order or the contract. 1.3?UnitsThe values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4?These digital reference images are not intended to illustrate the types and degrees of discontinuities found in aluminum-alloy castings when performing film radiography. If performing film radiography of aluminum-alloy castings, refer to Reference Radiographs E155. 1.5?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6?Only licensed copies of the software and images shall be utilized for production inspection. A copy of the ASTM/User license agreement shall be kept on file for audit purposes. Note 1:?The set of digital reference images consists of 13
digital files, software to load the desired format, and specific
instructions on the loading process. The 13 reference images
illustrate eight grades of severity and contain an image of a step
wedge and two line pair gauges. Available from ASTM International
Headquarters, Order No: RRE2422. Refer to Practice E2002 for line pair gauge
details.
Note 2:?Reference radiographs applicable to aluminum and
magnesium die castings up to 1 in. (25 mm) in thickness are
contained in Reference Radiographs E505.
1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.