Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
Automaticky přeložený název:
Standardní zkušební metoda pro dirigování Traverse a koncentruje se zátěžové zkoušky na panelech používaných v patře a střešní konstrukci
NORMA vydána dne 1.4.2009
Označení normy: ASTM E2322-03(2009)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2009
Kód zboží: NS-45030
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
concentrated loads, deformation, floors, load duration, roofs, sheathing, strength tests, transverse loads, Concentrated loading tests, Deformation, Flooring/floor covering systems, Loading tests--flooring, Loading tests--roofing materials, Roofing materials/applications, Sheaths/sheathing, Strength--roofing materials/applications, Transverse load-bearing materials/applications, ICS Number Code 91.060.30 (Ceilings. Floors. Stairs)
Significance and Use | ||||||||||||||||||||||||
Transverse Load—The procedures outlined will serve to evaluate the performance of floor and roof segments for deflection, permanent set and ultimate capacity. Performance criteria based on data from these procedures can ensure structural adequacy and effective service. Concentrated Load—This concentrated load test shall be used to evaluate surface indentation of structural framing members. These procedures will serve to evaluate performance of roof and floor segments under simulated service conditions. Diaphragm shear loading of roof and floor segments shall be evaluated under Test Method E 455. Impact loading shall be evaluated under Test Methods E 661 or E 695. |
||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||
1.1 This test method covers the following procedures for determining the structural properties of segments of floor and roof constructions:
1.2 This test method serves to evaluate the performance of floors and roofs panels subjected to (1) Uniform loading, and (2) Concentrated static loading, which represent conditions sustained in the actual performance of the element. The standard is not intended for the evaluation of individual structural framing or supporting members (floor joist, rafters, and trusses), or both. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the standard. 1.4 This standard is not intended to cover concrete floor slabs. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||
|
Poslední aktualizace: 03.09.2024 (Počet položek: 2 346 077)
© Copyright 2024 NORMSERVIS s.r.o.