Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM E1999-99(2004) 1.10.2004 náhled

Doplňující informace

ASTM E1999-99(2004)

Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry

Automaticky přeložený název:

Standardní zkušební metoda pro analýzu litiny pomocí optických emisní spektrometrií

NORMA vydána dne 1.10.2004

Jazyk
Provedení	PDF - okamžité stažení - 1 984.70 Kč Tištěné - 1 984.70 Kč
Dostupnost	SKLADEM
Cena	1 984.70 Kč bez DPH
1 984.70 Kč

Informace o normě:

Označení normy: ASTM E1999-99(2004)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2004
Kód zboží: NS-43897
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM E1999-99(2004) :

Keywords:

cast iron, optical emission, spectrometric analysis, ICS Number Code 71.040.50 (Physicochemical methods of analysis)

Doplňující informace

Significance and Use

The chemical composition of cast iron alloys must be determined accurately in order to insure the desired metallurgical properties. This procedure is suitable for manufacturing control and inspection testing.

1. Scope

1.1 This test method covers the optical emission spectrometric analysis of cast iron by use of the point-to-plane technique for the following elements in the concentration ranges shown (Note 1):

Concentration Ranges, %
Elements	Applicable Range, %	Quantitative Range, %^A

Carbon	1.9 to 3.8	1.90 to 3.8
Chromium	0 to 2.0	0.025 to 2.0
Copper	0 to 0.75	0.015 to 0.75
Manganese	0 to 1.8	0.03 to 1.8
Molybdenum	0 to 1.2	0.01 to 1.2
Nickel	0 to 2.0	0.02 to 2.0
Phosphorus	0 to 0.4	0.005 to 0.4
Silicon	0 to 2.5	0.15 to 2.5
Sulfur	0 to 0.08	0.01 to 0.08
Tin	0 to 0.14	0.004 to 0.14
Titanium	0 to 0.12	0.003 to 0.12
Vanadium	0 to 0.22	0.008 to 0.22

^AQuantitative range in accordance with Practice E1601.

Note 1--The concentration ranges of the elements listed have been established through cooperative testing of reference materials. These concentration ranges can be extended by the use of suitable reference materials.

1.2 This test method covers analysis of specimens having a diameter adequate to overlap the bore of the spark stand opening (to effect an argon seal). The specimen thickness should be sufficient to prevent overheating during excitation. A heat sink backing may be used. The maximum thickness is limited only by the height that the stand will permit.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E305-21	Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
E172-90(1999)	Practice for Describing and Specifying the Excitation Source in Emission Spectrochemical Analysis (Withdrawn 2001)
E158-86(1996)e1	Standard Practice for Fundamental Calculations to Convert Intensities into Concentrations in Optical Emission Spectrochemical Analysis (Withdrawn 2004)
E135-23a	Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023).
E1019-18	Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1329-10	Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis (Withdrawn 2019)
E1601-19	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
E1763-06	Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods (Withdrawn 2015)
E1806-23	Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
MNL 7A	Manual on Presentation of Data and Control Chart Analysis ASTM Manual Series, ASTM, 6th Edition, 1990.
E351-18	Standard Test Methods for Chemical Analysis of Cast Iron´All Types
E826-14	Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry (Withdrawn 2023)
E406-19	Standard Practice for Using Controlled Atmospheres in Atomic Emission Spectrometry

Doporučujeme:

EviNor - Řízení a aktualizace českých norem

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.